Page 1
9 - 10 Use Liquid Thread Locker SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
GPS Bracketry. Step 2: Unscrew the 2 off Button Head screws, as shown, and keep them aside. SRC’s GPS Bracketry will be mounted/fitted using the above screws. Step 3: Under the Speedo console, unscrew the 2 off Button head screws, as shown.
Page 4
Slip-in 1 off Button head screw and secure the threads. The LH and RH GPS Brackets in “As is mounted condition” is as shown in the drawing to the right. Copyright By SRC Design and Specification are subjected to change Page 4...
Page 5
Follow the step 6, for mounting the RH Bracket and secure the threads The LH and RH Brackets, are as shown in the drawing on the left, in “As is mounted condition”. Copyright By SRC Design and Specification are subjected to change Page 5...
Page 6
16 (6) – 1 off from each side of the bracket and fully tighten the GPS bar, as shown. The GPS Bar in final mounted condition is as shown. Copyright By SRC Design and Specification are subjected to change Page 6...
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.