Additional Information; Cleaning The S3 Cell - Hayward AquaRite S3 Technical Training Manual

Salt chlorine generator
Hide thumbs Also See for AquaRite S3:
Table of Contents

Advertisement

Cleaning the S3 Cell

Cell cleaning frequency is dependent on several factors; pH & calcium levels have the greatest effect on how
often cells requires cleaning. In pH environments between (7.2 - 7.8) cells typically require cleaning 3-4 times
a year (with moderate calcium levels).
Turn Pump Off & Remove Cell
Wear Protective Equipment
Step 1
Step 2
Calcified Cell
Clean Cell
Holding the cell up to a light source, inspect for calcium
If the cell requires cleaning, please wear protective
deposits. Even if a S3 Cell appears clean,
equipment. It is highly recommended to use a
it may still require cleaning if salt accuracy is off AND/OR
Hayward Cell Cleaning Stand as shown
chlorine production has diminished.
(GLX-CELLSTAND)
NOTE: ALWAYS WEAR PROPER EYE PROTECTION AND PROTECTIVE GLOVES.
MIX SOLUTION AND CLEAN THE CELL ONLY IN A WELL-VENTILATED AREA.
MURIATIC AND OTHER ACIDS CAN CAUSE SEVERE INJURY, BURNS AND RESPIRATORY PROBLEMS IF NOT HANDLED
PROPERLY. REFER TO THE MANUFACTURER'S DIRECTIONS FOR SAFE HANDLING.
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents