Do you have a question about the EcoStar and is the answer not in the manual?
Questions and answers
Steve
February 21, 2025
Clarify setting actual tine of current day. Production Version SP3400VSP, S.N. 17023361
1 comments:
Mr. Anderson
February 21, 2025
To set the current time on the Hayward EcoStar SP3400VSP:
1. Press the ">" button to enter the Configuration Menu. 2. Use the "+" or "-" buttons to adjust the time. 3. Press ">" to move to the next item or confirm the selection.
This will allow you to set the correct day and time on the pump.
Page 17
Hayward EcoStar Pump SP3400VSP Thursday 1:27p 1725rpm 380 Watts Timer 1 timer will end at 11:45p...
Page 18
Th 1:27PM + change > skip Set Day and Time Thursday 1:27p Speed Selection MAX allowed speed 3450 (600-3450rpm) MIN allowed speed 600 (600-3450rpm) Set max-speed Prime Period: Auto Sense Remote Control Mode Standalone/Hayward Set COMM Bus Address Pool Filter...
Page 19
Reset all parameters + for yes; > to skip Are you sure? + for yes; - for no Use Timers Menu to set timeclocks. Timer Menu Press > to enter Timer 1 1725rpm --- Off --- Press + to change; Press >...
Page 20
Choose Days 7D 7 days a week > Speeds Menu Press > to enter Speed 1 Name Speed 1 Speed 1 Duration 0:30 hours Speed 1 Speed 1725 (600-3450rpm) Diagnostic Menu Press > to enter Serial Number 03100002 Drive Rev: 1.01 Display Rev: 2.54B...
Page 21
Input Voltage Within Range Motor Current 1.1A (0-13.0A) Power Usage 225W (0-2650W) Driver: Heatsink: Comm Bus Online (Addr: 1) Event log Press + to view Pump is stopped; press STOP/RESUME again to resume normal operation. SVRS inactive in Quick Clean mode. No bathers in water During Quick Clean...
Page 22
Bathers in water? + = yes; - = no SVRS Inactive Quick Clean running SVRS Inactive 3200 rpm for 60 min; SVRS Inactive Press resume to end. Remote Stop is engaged...
Need help?
Do you have a question about the EcoStar and is the answer not in the manual?
Questions and answers
Clarify setting actual tine of current day. Production Version SP3400VSP, S.N. 17023361
To set the current time on the Hayward EcoStar SP3400VSP:
1. Press the ">" button to enter the Configuration Menu.
2. Use the "+" or "-" buttons to adjust the time.
3. Press ">" to move to the next item or confirm the selection.
This will allow you to set the correct day and time on the pump.
This answer is automatically generated