WORKMASTER GO-A8-PW Operator's Manual page 35

UNIVERSAL JOINT
CAPSTAN
SWAGING KIT
PIN & RING CONNECTOR
Covered Hopper Cars come in a variety of shapes and sizes,
and the height of a capstan and the surrounding terrain can
vary just as much. This heavy duty Universal Joint can
overcome these height variances by positioning your Drive
Fitting directly in-line with the center of the capstan. Correct
alignment with the capstan is critical to the life of your Gate
Opener and can insure the solid in-line entry of the Drive
Fitting on even the steepest of railroad slopes.
PART #: 33-10090
Over time the inside edges of a Railcar's capstan wear and become
rounded. When this happens opening or closing a hopper car
becomes an inefficient and costly task. The Capstan Swage Kit can
bring new life to dull, worn and damaged capstans. With just a
few, sharp hammer blows, worn or damaged capstans are quickly
renewed. The Swage Tool is machined from Grade 4140 tool steel
and specially heat treated for proper hardness. The non-sparking,
non-magnetic Swagging Hammer, with a patented dead blow
technology, delivers 40% more driving force than conventional style
hammers. It has a 15" overall length and a 2-1/2" face that makes
hitting the targeted Swage Tool a cinch every time. With an
ergonomic grip design and weighing only 48oz. the Swagging
Hammer is comfortable and easy to swing. Our Swage Tool and
Swagging Hammer Kit can deliver the results you need to get
difficult capstan sockets squared-up and ready to roll.
MEETS OSHA STANDARDS FOR NON-SPARKING HAMMERS.
If your unloading site sees a variety of railcars and
you 're constantly changing the accessories on your
Gate Opener, you'll need WORKMASTER's Pin and
Ring Connectors to help keep the job moving. The
Pin is hardened steel, the Ring is nick-resistant
rubber, together they make changing from your 12"
Extension to your Universal Joint, to your 20"
Extension, quick and easy. WORKMASTER's Pin
and Ring Connectors are also OSHA approved
because there are no protruding ends that can
damage property or injure workers.
PIN, PART #: 32-50123
RING, PART #: 32-50000
PART #: 33-11120
30