Table of Contents
Advertisement
2.4GHz
Enable/Disable: Enables or disables 2.4GHz wireless LAN on the WLAN Router.
SSID: Type an SSID in the text box. The SSID of any wireless device must match
the SSID typed here in order for the wireless device to access the LAN and WAN
of the WLAN Router.
Channel: Select a transmission channel for wireless communications. The channel
of any wireless device must match the channel selected here in order for the
wireless device to access the LAN and WAN via the WLAN Router.
802.11 Mode: Select one of the following:
2.4GHz 802.11b only mode - Select if you are using only 2.4GHz 802.11b
wireless clients.
2.4GHz 802.11g only mode - Select if you are using only 2.4GHz 802.11g
wireless clients.
2.4GHz 802.11n only mode - Select if you are using only 2.4GHz 802.11n
wireless clients.
2.4GHz 802.11b/g mixed mode - Select if you are using both 2.4GHz
802.11b and 802.11g wireless clients.
2.4GHz 802.11b/g/n mixed mode - Select if you are using a mix of 2.4GHz
802.11b, 11g, and 11n wireless clients.
Channel Width: Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless
devices.
20MHz - This is the default setting with single channel support required by
Wi-Fi regulations.
SSID Broadcast: While SSID Broadcast is enabled, all wireless clients will be able
to view the WLAN Router's SSID. For security purposes, users may want to
disable SSID Broadcast to ensure only authorized clients have access.
WMM: If selected the Enable, the WMM (Wi-Fi Multimedia Quality of Service)
feature will be enabled.
29
Advertisement
Table of Contents
