Table of Contents
Advertisement
When the lift is delivered make sure that it has not been damaged during transportation and that all the parts specified on the packing list
are present.
Packs must be opened adopting all the precautions required to avoid injury to persons (keep at a safe distance when cutting the straps) or
damage to parts of the machine (be careful that no parts are dropped while you are opening the packing).
Take special care with the hydraulic power unit, the control panel and the cylinder.
PRODUCTS DESCRIPTIONS
3.1 General descriptions
This is chassis supporting vehicle lift for road vehicles.
It is mainly composed by two posts, two carriages, four swing arms and a power and control unit.
It is driven by an electro‐hydraulic system. The gear pump delivers hydraulic oil to oil cylinders and pushes upwards its piston. The cylinder
piston drives to raise the carriage and swing arms. It is equipped with mechanical safety locking unit which ensures no risks of slipping off in
case of hydraulic failure.
3.2 Construction of the lift
Installation, Operation and Parts Manual
1. Overhead crossbeam
2. Extending post
3. Mechanical safety latch
4. Carriage
5. Hydraulic power unit
6. Lifting arm
9
MJ-C10
Advertisement
Table of Contents
