Major MJ-C10 Installation Manual page 19

Step 10: Assemble and fix the mechanical safety locking unit.
a. Assemble the locking device.
Locking assembly at the power‐side post
Locking assembly at the other post
2. Route and fix the release rope for mechanical safety locking assembly.
2.1 Make release rope goes through pulleys on top of the two posts and fix the release rope at both sides of the post.
Installation, Operation and Parts Manual
1.circlip
2.washer
3.spring 1
4.spring 2
5.shaft
6.handle bar
7.hook
8.nylon spacer
9.release plate
19
MJ-C10