Jeep Compass 2023 Owner's Manual page 65

To change the level of the load floor, pull upward on the
load floor handle, pull the floor outward, and place the
back of the floor into the desired position. Lower the front
of the floor into place.
Cargo Load Floor Positions
1 — Upper Position
2 — Center Position
3 — Lower Position
Raising The Load Floor
To raise the load floor for access to the Tire Service Kit, or
spare tire (if equipped), pull upward on the load floor
handle.
Do not raise the floor beyond the point of resistance. In
vehicles equipped with a power liftgate, forcing the floor
upward can damage the floor and vehicle's trim panel.
Raised Load Floor — (Power Liftgate)
1 — Raised Floor Maximum Height
2 — Raised Load Floor
GETTING TO KNOW YOUR VEHICLE
To fully raise the load floor, pull upward on the floor
handle, pull the floor outward, then position the floor
upright with the bottom fitting on top of the floor
positioning brackets. Push the top of the floor down firmly
to secure it in this position.
Fully Raised Load Floor Position
To provide additional storage area, each rear seat can be
folded flat. This allows for extended cargo space and still
maintains some rear seating room page 26.
Ú
63
2