Advertisement
Specifications
REEL CONSTRUCTION:
7 or 11 blades
HEIGHT OF CUT RANGE:
5 Blade: 19 mm to 38 mm
7 Blade: 12.7 mm to 28 mm
11 Blade:9.5 mm to 19 mm
Use bedknife Part No. 93-9774 for heights of cut
Note:
below 12.7 mm.
17.7 mm
REEL DIAMETER:
Reel motors feature quick disconnect for
POWER:
removal or installation onto the cutting unit. Cutting
units can be driven from either end.
HEIGHT-OF-CUT & ROLLER ADJUSTMENT:
of-cut adjustment is made at the rear roller with the
quick locating pin and/or threaded micro-adjustment.
The front roller position is adjustable, for setting unit
attitude.
BEDKNIFE AND BEDBAR ADJUSTMENT:
point adjustment mechanism.
2
Fairway reels. All welded. 5,
Height-
Single-
.9.5 mm—31.7mm. Reel speed
CLIP FREQUENCY:
automatically adjusts to maintain proper clip. Reel
speed is continuously calculated based on the current
forward speed, reel type (number of blades) and height
of cut.
ROLLERS:
7.62 cm diameter Wiehle rollers. Optional
Front rollers:
7.62 cm diameter full rollers, Part No. 93-3040, are
available for the front position.
6.35 cm diameter full rollers. All rollers
Rear rollers:
use the same heavy-duty ball bearings with two
conventional single lip seals and a Toro labyrinth seal to
provide four sealing surfaces to protect the bearings.
ROLLER SCRAPER KITS:
Front Roller Scraper
Rear Roller Scraper Kit
Part No. 95-7729
Part No. 98-7996 (1 per kit)
Advertisement
