Klarstein AVA 60 SMART Manual page 34

EN
34
Dowel
Shaft bracket
• Pull the upper/inner part of the shaft up to the desired height. Mark the
mounting holes for the upper shaft bracket on the wall and pre-drill the
holes at the marked locations.
• Fix the upper shaft bracket to the wall with 2 dowels and 2 scews
(4 x 30 mm) in the pre-drilled holes.
• Fasten the upper/inner part of the shaft to the bracket with 2 screws
(4 x 8 mm).
• Place the shaft on the housing of
the cooker bonnet.
• Mark the mounting holes on the
wall and pre-drill the holes at the
marks.
• Fix the lower shaft bracket to the
wall with 2 dowels and screws
(4 mm x 30 mm).
Screw
(4 mm x 8 mm)
Screw
(4 mm x 30 mm)