EN
44
Replacing the lamp
•
The lamp may only be replaced by a qualified electrician.
•
Disconnect all power connections before opening the appliance.
•
There is a risk of burns! Always allow the lamp to cool down before replacing
it.
•
Always use gloves or a cloth to avoid direct contact with your hands. Direct
contact can shorten the life of the lamp.
•
Replace the lamp with a lamp of the same type and amperage.
Note: Remember to reattach everything after inserting the new lamp and fix all
screws in the same position
DISMANTLING THE COOKER BONNET
1.
Make sure that the on/off switch is in the "0" position.
2.
Unplug the power cord from the wall socket.
3.
Remove the cooker bonnet from the wall or cabinet.
4.
Remove the filter. Dispose of the filters at a collection point for the recycling of
waste electrical and electronic equipment.
5.
Remove the motor. Dispose of the motor at a collection point for the recycling
of waste electrical and electronic equipment.
6.
Dispose of the rest of the cooker bonnet at your local recycling centre.