Klarstein AVA 60 SMART Manual page 33

• Open the glass cover (1) and remove the metal grease filter (2-3). Mark the
four mounting holes from the inside of the cooker bonnet.
• Remove the cooker bonnet again. Drill four holes with a diameter of 8 mm
into the wall at the marked points and insert dowels into the holes.
• Hang the cooker bonnet on the wall bracket and fix it to the dowels (4) with
the screws from the inside of the cooker bonnet.
• Attach the exhaust air hose to the outlet (5).
Upper/inner part
Shaft bracket Shaft bracket
part of the shaft
• Push the upper part of the shaft into the lower part. Pay attention to the
position of the ventilation openings depending on whether they are used
for exhaust air or recirculation air (see illustration).
• Attach the shaft bracket to the lower/outer part of the shaft.
of the shaft
Lower/outer
EN
33