Dell P72G Owner's Manual page 71

Option Description
•
•
•
Default setting: Disabled
USB Wake Support Allows you to enable USB devices to wake the system from Standby.
•
•
Wireless Radio Allows you to enable or disable the feature that automatically switches from wired or wireless networks without
Control depending on the physical connection.
•
•
Default setting: The option is disabled.
Wake on LAN/ Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
WLAN LAN signal.
•
•
•
•
Default setting: Disabled
Block Sleep This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After you
enable this option, your system runs only in battery even if the AC is attached.
Advanced Battery This option enables you to maximize the battery health. By enabling this option, your system uses the standard
Charge charging algorithm and other techniques, during the non-work hours to improve the battery health.
Configuration
Disabled
Default setting: Disabled
Primary Battery Allows you to select the charging mode for the battery. The options are:
Charge
•
Configuration
•
•
•
Every Day
Weekdays
Select Days
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
Enable USB Wake Support
Wake on Dell USB-C Dock: This option is enabled by default.
Control WLAN Radio
Control WWAN Radio
Disabled
LAN Only
WLAN Only
LAN or WLAN
Adaptive
Standard — Fully charges your battery at a standard rate.
ExpressCharge — The battery charges over a shorter period of time using Dell's fast charging technology.
This option is enabled by default.
Primarily AC use
System setup options 71