Advertisement
Quick Links
Advertisement
Related Manuals for TRENDnet TEG-S2500i
Summary of Contents for TRENDnet TEG-S2500i
- Page 1 TEG-S2500i 24+2G Stackable Switch Quick Installation Guide...
-
Page 2: Installation
Desktop or Shelf Installation: When installing the Switch on the desktop or shelf, please attach the rubber feet to the Switch. Peel off the protective paper on the pads and attach them on the bottom of the Switch (one at each corner). -
Page 3: Led Indicators Information
~ 260V AC, 50 ~ 60Hz power source. The AC power cord connector is located at the rear of the unit and the On/Off switch is next to the connector. Connect the power cord from the power outlet to the Switch and push the On/Off Switch to “ON” position to power on the Switch. - Page 4 “Enter” once to get the login screen. At “username” field type in At “password” field type in 123 and hit “Enter”. You are now login to the Switch’s configuration program. On the lower portion of the screen, you will see descriptions of the navigation keys (e.g.
- Page 5 After that, you can either change your computer’s IP address to the same class as the Switch’s IP address, or you can login the Switch with the “out-of-band” method described in the previous section and configure the Switch’s IP address to the same class as your computer’s IP address.
-
Page 6: Technical Support
10. Use “Tab” key to select “Save” and hit “Enter”. 11. The screen will prompt you to “restart the system…”, turn off the Switch, wait for 10 seconds, and then turn the Switch’s power back on. After the Switch finishes the self-diagnostic, open your computer’s web browser and at the “Address:”...