Advertisement
◆ How to Switch Modes
Press the [Temperature] key and
[Time] key simultaneously for at least
2 seconds.
The operating mode changes as fol-
lows.
Standard mode
Professional
2 mode
Operating Procedure
Perform the procedures in the order of 1, 2, 3, and then 4.
The following settings and procedures are examples for major fabrics.
Depending on your environment, discoloration may occur or the ink may not be fixed prop-
erly. Before configure the settings, check the fixability of the fabric you use.
Fabric type
Mode
T-shirt
Standard mode
Professional
mode
Professional 2
mode
Tote bag (thick)
Standard mode
Professional
Tote bag (thin)
mode
Sweatshirts
DYX353
Professional
mode
DYX354
Temperature
1. Preparation
170°C (338°F)
See next
page.
180°C (356°F)
170°C (338°F)
150°C (302°F)
170°C (338°F)
◆ Unlock Cover
When set to standard mode, press
the [Stop/ Unlock] key for at least 1
second.
When set to the professional mode,
it is not necessary to hold down the
[Stop/Unlock] key.
2. Pressing
3. Printing
See BT-12
30sec
Operating
Instructions.
30sec
30sec
30sec
30sec
DYX360
4. Fixing
3min
30sec
3min
3min
3min
3min
Advertisement
