Table of Contents
Advertisement
INFORMATION
Each time
or
advances by 10 minutes. Holding the button down will
change the setting rapidly.
4 To stop operation, press
Result:
and
disappear from the LCD and the timer
lamp goes off.
and the day of the week are displayed on the LCD.
INFORMATION
When you set the ON/OFF timer, the time setting is stored
in the memory. When the wireless remote control batteries
are replaced, the remote control keeps the time setting for
the ON/OFF timer, but the timer is cancelled.
Night set mode
When the OFF timer is set, the air conditioner
automatically adjusts the temperature setting (0.5°C up in
cooling, 2.0°C down in heating) to prevent excessive
cooling/heating
and
temperature.
To start/stop ON timer operation
1 Press
to start.
Result:
is displayed on the LCD and
the day of the week disappear from the LCD.
2 Press
or
to change the time setting.
3 Press
again.
Result:
and the set time are displayed on the LCD. The timer
lamp lights up.
INFORMATION
Each time
or
advances by 10 minutes. Holding the button down will
change the setting rapidly.
4 To stop operation, press
Result:
and
disappear from the LCD and the timer
lamp goes off.
and the day of the week are displayed on the
LCD.
To combine OFF timer and ON timer
1 To set the timers, refer to
operation" [ 4 10] and
"To start/stop ON timer
Result:
and
are displayed on the LCD.
Example:
Display
Current time
6:00
Note: If the timer setting is active, the current time is NOT displayed
on the LCD.
FTXTA30C2V1B(W)(B)
Daikin room air conditioner
3P728539-2D – 2023.09
is pressed, the time setting
.
ensure
a
comfortable
sleeping
blinks.
is pressed, the time setting
.
"To start/stop OFF timer
operation" [ 4 11].
Set while...
Operation
the unit is
Stops at 7:00
operating.
and starts at
14:00.
the unit is NOT
Starts at 14:00.
operating.
5.9.2
12 hour countdown OFF/ON timer setting
To start/stop countdown OFF/ON timer operation
1 Press and hold
when
blinks, release the button.
Result:
For the OFF timer,
blinks,
and the day of the week disappear from the
LCD.
For the ON timer,
blinks.
and the day of the week disappear from the
LCD.
2 Press
or
set between 1~12 hours. Each pressing of the button increases
or decreases the time setting by 1 hour.
3 Press
Result:
and/or
The timer lamp lights up. The time displayed on the LCD will
automatically count down by 1 hour for every hour that passes.
Example: If the OFF timer is set to 3 hours, the displayed time will
change as follows: 3hr → 2hr → 1hr → blank (OFF)
4 To change the setting back to 24 hour OFF/ON timer, repeat
step 1 when on the home screen when
and
NOT blinking.
5 To cancel the timer setting, press
To combine the timer display modes
Different display modes (24 hour and 12 hour countdown OFF/ON
timer) can be used for the OFF timer and ON timer simultaneously.
1 For setting, see
start/stop ON timer
countdown OFF/ON timer
Example:
Display
Current time
22:00
Note: If the timer setting is active, the current time is NOT displayed
on the LCD.
5.10
Weekly timer operation
INFORMATION
The following setting procedure is for the wireless remote
control only. However, we recommend to perform the
weekly timer setting using the ONECTA app. Refer to
Wireless LAN connection for more information.
With this operation, you can save up to 4 timer settings for each day
of the week.
Example: Create a different setting from Monday to Friday and a
different setting for weekends.
Day of the week
Monday
▪ Make up to 4 settings.
5 Operation
or
for about 5 seconds;
appears on the LCD and
appears on the LCD and
to change the time setting. The time can be
or
to confirm the setting.
and the set time are displayed on the LCD.
and/or
.
operation" [ 4 10],
"To start/stop OFF timer
operation" [ 4 11] and
operation" [ 4 11].
Set while...
Operation
the unit is
▪ Stops at 1:00
operating.
▪ Starts
Setting example
1
2
3
ON
OFF
ON
25°C
25°C
6:00
8:30
17:30
Operation manual
are
"To
"To start/stop
(3 hours after
present time)
at
6:00. (8 hours
after present
time)
4
OFF
27°C
22:00
11
Advertisement
Table of Contents
