Dos Flash Utility - Packard Bell EasyNote LJ75 Service Manual

DOS Flash Utility

Perform the following steps to use the DOS Flash Utility:
1. Press F2 during boot to enter the Setup Menu.
2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move
USB HDD to position 1.
Information Main
Boot priority order: Boot priority order:
1. IDE0 : WDC WD5000BEVT-22ZAT0 1. IDE0 : WDC WD5000BEVT-22ZAT0
2. IDE2 : 2. IDE2 :
3. IDE1 : MATSHITADVD-RAM UJ880AS 3. IDE1 : MATSHITADVD-RAM UJ880AS
3. USB FDD : 3. USB FDD :
4. Network Boot : Atheros Boot Agent 4. Network Boot : Atheros Boot Agent
5. USB HDD : 5. USB HDD :
6. USB CDROM : 6. USB CDROM :
F1 Help
ESC Exit
3. Execute the FLASH.BAT batch file to update BIOS.
The flash process begins as shown.
40
All manuals and user guides at all-guides.com
InsydeH20 Setup Utility
Advanced Security Power
Select Item Change Values
F5/F6
Select Menu Enter Select
Boot Exit
Item Specific Help
Use < > or < > to select
a device, then press
<F5> to move it down the
list, or <F6> to move
it up the list. Press
<Esc> to escape the menu
F9 Setup Default
SubMenu F10 Save and Exit
Rev. 3.5
Chapter 2