Replacing The Cpu Fan - Packard Bell EasyNote LJ75 Service Manual

3. Align the four screw holes on the Thermal Module
and Mainboard and lower the module into place.
Keep the module as level as possible to spread the
thermal grease evenly.

Replacing the CPU Fan

1. Align the three screw holes on the CPU Fan and
Mainboard and lower the module into place.
3. Connect the CPU Fan power cable to the Mainboard connector as shown.
Chapter 3
All manuals and user guides at all-guides.com
4. Secure the four screws (in numerical order from
2. Secure the three screws in the CPU Fan as shown.
screw 1 to screw 4) in the Thermal Module as
shown.
3
2
1
4
115