Packard Bell EasyNote LJ75 Service Manual page 137

5. Run the LVDS cable along the cable channel as
shown, using all the available cable clips.
7. Run the Power Board cable along the cable channel
using all available cable clips.
9. Run the Antenna cables along the cable channel
using all available cable clips.
Chapter 3
All manuals and user guides at all-guides.com
6. Reconnect the LVDS cable to the Mainboard as
shown.
8. Connect the Power Board cable to the Mainboard
as shown.
10. Insert the Antenna cables through the chassis as
shown.
127