Summary of Contents for Packard Bell EasyNote LJ75
Page 1
All manuals and user guides at all-guides.com Packard Bell EasyNote LJ75/LJ77 Service Guide Service guide files and updates are available on the ACER/CSD web; for more information, please refer to http://csd.acer.com.tw PRINTED IN TAIWAN...
Page 2
All manuals and user guides at all-guides.com Revision History Please refer to the table below for the updates made to this service guide. Date Chapter Updates...
Page 4
All manuals and user guides at all-guides.com Conventions The following conventions are used in this manual: Denotes actual messages that appear SCREEN MESSAGES on screen. NOTE Gives bits and pieces of additional information related to the current topic. WARNING Alerts you to any damage that might result from doing or not doing specific actions.
Page 5
All manuals and user guides at all-guides.com Preface Before using this information and the product it supports, please read the following general information. This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION decided for Acer's "global" product offering. To better fit local market requirements and enhance product competitiveness, your regional office MAY have decided to extend the functionality of a machine (e.g.
Page 6
All manuals and user guides at all-guides.com...
All manuals and user guides at all-guides.com Chapter 1 System Specifications Features Below is a brief summary of the computer’s many features: NOTE: Specifications denoted with an asterisk (*) vary depending on the model. Operating System • Genuine Windows® 7 Home Premium 64-bit* •...
Page 12
All manuals and user guides at all-guides.com • Dual independent display support • 16.7 million colors • External resolution / refresh rates*: • VGA port up to 2048 x 1536: 85 Hz • HDMI™ port up to 1920 x 1200: 60 Hz •...
Page 13
External display (VGA) port • Headphone/speaker/line-out jacks with S/PDIF support • Microphone-in jack • Ethernet (RJ-45) port • Modem (RJ-11) port* • DC-in jack for AC adapter Software* • Packard Bell Customer Registration • Packard Bell Identity Card Chapter 1...
Page 14
All manuals and user guides at all-guides.com • Packard Bell InfoCentre • Packard Bell MyBackup Solution • Packard Bell Recovery Management • Packard Bell Updater • Adobe® Flash® Player 9 • Adobe® Photoshop® Elements 7 • Adobe® Reader® 9 •...
All manuals and user guides at all-guides.com Your Notebook tour NOTE: Port placement may vary depending on the model. Front View Component Icon Description Chapter 1...
All manuals and user guides at all-guides.com Left View Component Icon Description Kensington™ Secure your notebook to an object by connecting a lock slot Kensington cable lock to this slot. Monitor port Plug an analog VGA monitor or projector into this port. Ethernet jack Plug an Ethernet network cable into this jack.
All manuals and user guides at all-guides.com Right View Component Icon Description Blu-Ray Disc Insert CDs or DVDs into this drive. Drive USB ports (2) Plug a USB device (such as a diskette drive, flash drive, printer, scanner, camera, keyboard, or mouse) into this port.
All manuals and user guides at all-guides.com Bottom View Component Icon Description Battery Provides power when the notebook is not plugged into AC power. Battery lock Slide to unlock the battery. Battery latch Slide to release the battery. Memory bay Memory modules are located in this bay.
All manuals and user guides at all-guides.com Keyboard Area (selected models) Component Description Capacitive touch Press to access capacitive touch key function. keys Touchpad Provides all the functionality of a mouse. Chapter 1...
All manuals and user guides at all-guides.com LCD Panel Component Description Display 15.6" HD 1600 x 900 pixel resolution, high-brightness (220- nit) TFT LCD with Diamond View Technology Webcam Use to let others see who they are communicating with when making VoIP calls. Chapter 1...
All manuals and user guides at all-guides.com Status Indicators Status indicators inform you when a drive is being used or when a button has been pressed that affects how the keyboard is used. The status indicators are located below the screen. Num lock Battery Bluetooth...
All manuals and user guides at all-guides.com TouchPad Basics The following items show you how to use the TouchPad: • Move your finger across the TouchPad (1) to move the cursor. • Press the left (2) and right (3) buttons located beneath the TouchPad to perform selection and execution functions.
All manuals and user guides at all-guides.com Using the Keyboard Your notebook features a full-size keyboard that functions the same as a desktop computer keyboard. Many of the keys have been assigned alternate functions, including shortcut keys for Windows, function keys for specific system operations, and the Num Lock keys for the numeric keypad.
All manuals and user guides at all-guides.com Windows Keys The keyboard has two keys that perform Windows-specific functions. Description Pressed alone, this key has the same effect as clicking on the Windows Start button; Windows key it launches the Start menu. It can also be used with other keys to provide a variety of functions: <...
All manuals and user guides at all-guides.com System Keys The computer employs hotkeys or key combinations to access most of the computer’s controls like screen brightness, Bluetooth and WiFi. To activate hot keys, press and hold the <Fn> key before pressing the other key in the hotkey combination. Function Key Description Turn the capacitive touch key LEDs on or off.
All manuals and user guides at all-guides.com Hardware Specifications and Configurations Processor Item Specification Intel Mobile Calpella rPGA988A Core Logic Intel Ibex Peak-M (HM55) Power See table below On-die Cache • A 32-KB instruction and 32-KB data first-level cache (L1) for each core •...
Page 28
All manuals and user guides at all-guides.com Northbridge Item Specifications Chipset Intel Ibex Peak-M (HM55) Features • Dual-channel DDR3 1066 MHz memory support • Serial ATA • Hi-Speed USB 2.0 connectivity BIOS Item Specification BIOS vendor Insyde H20 BIOS Version V0.07 BIOS ROM type Flash...
Page 29
All manuals and user guides at all-guides.com Memory Combinations Slot 1 Slot 2 Total Memory 512MB 512MB 1024MB 1024MB 2048MB 2048MB 512MB 512MB 1024MB 512MB 1024MB 1536MB 512MB 2048MB 2560MB 1024MB 1024MB 1024MB 512MB 1536MB 1024MB 1024MB 2048MB 1024MB 2048MB 3072MB 2048MB 2048MB...
Page 30
All manuals and user guides at all-guides.com LAN Interface Item Specification LAN Chipset Broadcom BCM57780 LAN connector type RJ45 LAN connector location Left side Features Support for 10/100/1000* *Check model number for specifications. Wireless Module 802.11b/g Item Specification Manufacturer/Model • Realtek 8192SE •...
Page 31
All manuals and user guides at all-guides.com Item Specifications Vendor & Model Name Toshiba Capacity 250GB Bytes per sector Data heads Drive Format Disks Spindle speed (RPM) 5400 Performance Specifications Buffer size Interface SATA Internal transfer rate (Mbits/sec, max) 363 ~ 952 typical I/O data transfer rate 3Gbits/s DC Power Requirements...
Page 32
All manuals and user guides at all-guides.com Item Specifications Internal transfer rate (Mbits/ sec, max) I/O data transfer rate 3 GB/s DC Power Requirements Voltage +5.0V ± 5% Chapter 1...
Page 33
All manuals and user guides at all-guides.com Super-Multi Drive Module Item Specification Vendor & model name HLDS/GSA-T50, Toshiba Digi/TS-L633A Performance Specification With CD Diskette With DVD Diskette Transfer rate (MB/sec) Sustained: Sustained: Max 3.5 Mbytes/sec Max 10 Mbytes/sec Buffer Memory Interface SATA Applicable disc format...
Page 34
All manuals and user guides at all-guides.com Item Specification Loading mechanism Drawer (Solenoid Open) Tact SW (Open) Emergency Release (draw open hole) Power Requirement Input Voltage DC 5 V +/- 5% Blue-Ray Combo Drive Module Item Specification Vendor & model name Sony BC-5500S Performance Specification With CD Diskette...
Page 35
All manuals and user guides at all-guides.com Audio Interface Item Specification Audio Realtek ALC272 Azalia Codec and Amplifier G1454 Controller • Features • HD Audio • SNR > 85,High-performance DACs with 95dB SNR (A-Weighting), ADCs with 85dB SNR (A-Weighting) • Internal Digital Microphone •...
Page 36
All manuals and user guides at all-guides.com Battery Specification Item 6 Cell 8 Cell Vendor & model name PANASONIC AS-2007B SANYO AS-2007B SAMSUNG AS-2007B SIMPLO AS-2007B SANYO AS-2007B SONY AS-2007B Battery Type Li-ion Li-ion Pack capacity 4400 mAh 4800 mAh Normal Voltage 11.1V 14.8...
All manuals and user guides at all-guides.com Chapter 2 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup.
All manuals and user guides at all-guides.com Main The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. InsydeH20 Setup Utility Rev. 3.5 Information Main Advanced Security Power Boot Exit...
All manuals and user guides at all-guides.com Advanced The Advanced screen allows the user to configure the various advanced BIOS options. IMPORTANT:Making incorrect settings to items on these pages may cause the system to malfunction. Unless you have experience adjusting these items, we recommend that you leave these settings at the default values.
Page 41
All manuals and user guides at all-guides.com Parameter Description Submenu Items Video Enter the Video Configuration menu. • Render Standby Configuration • IGD—Device2, Function1 • IGD—Pre-allocat Memory • IGD—DVMT Size • Clock Chip Initialize • Enabled CK SSC • IGD—Boot Type •...
All manuals and user guides at all-guides.com Security The Security screen contains parameters that help safeguard and protect your computer from unauthorized use. InsydeH20 Setup Utility Rev. 3.5 Information Main Advanced Security Power Boot Exit Item Specific Help Supervisor Password Is: Supervisor Password Is: Clear Clear...
Page 43
All manuals and user guides at all-guides.com Setting a Password Follow these steps as you set the user or the supervisor password: Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Supervisor Password box appears: Set Supervisor Password Enter New Password...
Page 44
All manuals and user guides at all-guides.com Changing a Password Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Password box appears. Set Supervisor Password Enter Current Password Enter New Password Confirm New Password Type the current password in the Enter Current Password field and press Enter.
All manuals and user guides at all-guides.com Power The Advanced screen allows the user to configure the various advanced BIOS options. IMPORTANT:Making incorrect settings to items on these pages may cause the system to malfunction. Unless you have experience adjusting these items, we recommend that you leave these settings at the default values.
Page 46
All manuals and user guides at all-guides.com The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default and suggested parameter settings. Parameter Description Submenu Items Advanced CPU Enter the Advanced CPU Control menu. •...
All manuals and user guides at all-guides.com Boot This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay. Select Boot Devices to select specific devices to support boot.
All manuals and user guides at all-guides.com Exit The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility. InsydeH20 Setup Utility Rev. 3.5 Information Main Advanced Security Power Boot Exit Item Specific Help Exit Saving Changes Exit Saving Changes Exit Discarding Changes...
All manuals and user guides at all-guides.com BIOS Flash Utilities The BIOS flash memory update is required for the following conditions: • New versions of system programs • New features or options • Restore a BIOS when it becomes corrupted. Use the Phlash utility to update the system BIOS flash ROM.
All manuals and user guides at all-guides.com DOS Flash Utility Perform the following steps to use the DOS Flash Utility: Press F2 during boot to enter the Setup Menu. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
Page 51
All manuals and user guides at all-guides.com In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays. Plug in the AC power to continue. Flash is complete when the message Flash programming complete displays. Chapter 2...
All manuals and user guides at all-guides.com WinFlash Utility Perform the following steps to use the WinFlash Utility: Double-click the WinFlash executable. Click OK to begin the update. A progress screen displays. Chapter 2...
All manuals and user guides at all-guides.com Remove HDD/BIOS Password Utilities This section provides you with details about removing HDD/BIOS password: Remove HDD Password: If you key in the wrong HDD password three times, an error is generated. To reset the HDD password, perform the following steps: After the error is displayed, select the Enter Unlock Password option on the screen.
Page 54
All manuals and user guides at all-guides.com Removing BIOS Passwords: To clear the User or Supervisor passwords, open the RAM door and use a metal instrument to short the RTC_RST and ME _RST jumper. Cleaning BIOS Passwords To clean the User or Supervisor passwords, perform the following steps: From a DOS prompt, execute clnpwd.exe Press 1 or 2 to clean the desired password shown on the screen.
Page 55
All manuals and user guides at all-guides.com Using Boot Sequence Selector The Boot Sequence Selector allows the boot order to be changed without accessing the BIOS. To use Boot Sequence Selector, perform the following steps: Enter into DOS. Execute BS.exe to display the usage screen. Select the desired boot sequence by entering the corresponding sequence.
Page 56
All manuals and user guides at all-guides.com Using DMITools The DMI (Desktop Management Interface) Tool copies BIOS information to EEPROM to be used in the DMI pool for hardware management. When the BIOS displays Verifying DMI pool data it is checking that the table correlates with the hardware before sending to the operating system (Windows, etc.).
Page 57
All manuals and user guides at all-guides.com Using the LAN Utility Run the LAN utility in DOS mode by preforming the following steps: Run the MAC.BAT file. Run the NAYF0.BAT file. The function is successful when “passed” displays onscreen. Chapter 2...
Page 58
All manuals and user guides at all-guides.com Chapter 2...
All manuals and user guides at all-guides.com Chapter 3 Machine Disassembly and Replacement IMPORTANT:The outside housing and color may vary from the mass produced model. This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting. Disassembly Requirements To disassemble the computer, you need the following tools: Wrist grounding strap and conductive mat for preventing electrostatic discharge...
All manuals and user guides at all-guides.com General Information Pre-disassembly Instructions Before proceeding with the disassembly procedure, make sure that you do the following: 1. Turn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cables from the system. 3.
All manuals and user guides at all-guides.com External Module Disassembly Process IMPORTANT:The outside housing and color may vary from the mass produced model. External Modules Disassembly Flowchart The flowchart below gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing.
All manuals and user guides at all-guides.com Removing the Battery Pack 1. Turn computer over. Slide the battery lock in the direction shown. 2. Slide and hold the battery release latch to the release position (1), then lift out the battery pack from the main unit (2).
All manuals and user guides at all-guides.com Removing the SD dummy card 1. Push the SD dummy card all the way in to eject it. 2. Pull the card out from the slot. Chapter 3...
All manuals and user guides at all-guides.com Removing the Lower Covers 1. See “Removing the Battery Pack” on page 52. 2. Loosen the five captive screws in the memory and HDD covers. HDD2, WLAN, and Memory Cover HDD1 Cover 3. Remove the HDD1 Cover. 4.
All manuals and user guides at all-guides.com Removing the Optical Drive Module 1. See “Removing the Lower Covers” on page 54. 2. Remove the screw securing the ODD module. Step Size Quantity Screw Type ODD Module M2.5*5 3. Insert a suitable tool into the access slot as shown. Gently lever the ODD module out of the chassis. 4.
Page 66
All manuals and user guides at all-guides.com 5. Remove the two screws securing the ODD bracket and remove the ODD bracket from the optical disk drive module. Step Size Quantity Screw Type ODD Bracket M2*3 6. Remove the ODD bezel by rotating the top edge downward and pulling it clear of the module. Chapter 3...
All manuals and user guides at all-guides.com Removing the DIMM Modules 1. See “Removing the Lower Covers” on page 54. 2. Push out the release latches on both sides of the DIMM socket to release the DIMM module. 3. Remove the DIMM module. 4.
All manuals and user guides at all-guides.com Removing the WLAN Module 1. See “Removing the Lower Covers” on page 54. 2. Remove the adhesive tape securing the Antenna cables in place. 3. Disconnect the antenna cables from the WLAN Module. NOTE: Cable placement is Black to the MAIN terminal (left) and White to the AUX terminal (right).
Page 69
All manuals and user guides at all-guides.com 4. Move the Antennas away and remove the two screws to release the WLAN Module. Step Size Quantity Screw Type WLAN Module M2*3 5. Detach the WLAN Module from the WLAN socket. NOTE: When reattaching the antennas, ensure the cables are tucked into the chassis to prevent damage. Chapter 3...
All manuals and user guides at all-guides.com Removing the Primary HDD Module 1. See “Removing the Lower Covers” on page 54. 2. Using the pull-tab, slide the HDD Module in the direction of the arrow to disconnect the interface. 3. Lift the HDD Module clear of the HDD bay. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
Page 71
All manuals and user guides at all-guides.com 5. Remove the HDD from the carrier. Chapter 3...
All manuals and user guides at all-guides.com Removing the Secondary HDD Module NOTE: The Secondary HDD is optional and may not be present. 1. See “Removing the Lower Covers” on page 54. 2. Using the pull-tab, slide the HDD Module in the direction of the arrow to disconnect the interface. 3.
Page 73
All manuals and user guides at all-guides.com 4. Remove the four screws (two each side) securing the hard disk to the carrier. Step Size Quantity Screw Type HDD Carrier M3*3 5. Remove the HDD from the carrier. Chapter 3...
All manuals and user guides at all-guides.com Main Unit Disassembly Process Main Unit Disassembly Flowchart Remove External Modules before proceeding Remove Switch Cover Remove Remove Keyboard Media Board Remove LCD Module Remove Upper Cover Upper Lower Cover Cover Remove Remove Remove Remove TouchPad...
All manuals and user guides at all-guides.com Removing the Switch Cover 1. See “Removing the Battery Pack” on page 52. 2. Lift the Media Board FFC cover as shown to expose the FFC connector. 3. Open the FFC locking latch and disconnect the Media Board FFC. 4.
Page 76
All manuals and user guides at all-guides.com 5. Open the computer lid to approximately 45° and push the Switch Cover from the underside of the computer to release the locking latches securing the cover in place. 6. Turn the computer over and open the lid fully. Lift the left side of the Switch Cover as shown. 7.
Page 77
All manuals and user guides at all-guides.com 8. Rotate the Switch Cover toward the LCD panel and lift it away from the Upper Cover. Chapter 3...
All manuals and user guides at all-guides.com Removing the Media Board 1. See “Removing the Switch Cover” on page 65. 2. Pry the Media Board away from the Switch Cover as shown. NOTE: A very strong adhesive is used to secure the board in place. 3.
All manuals and user guides at all-guides.com Removing the Keyboard 1. See “Removing the Switch Cover” on page 65. 2. Lift the keyboard from the centre as shown to release the securing clips on each side. 3. Turn the Keyboard over on the TouchPad to expose the FFC cable. 4.
Page 80
All manuals and user guides at all-guides.com 5. Disconnect the FFC cable from the mainboard. 6. Lift the keyboard clear of the chassis. Chapter 3...
All manuals and user guides at all-guides.com Removing the LCD Module 1. See “Removing the Keyboard” on page 69. 2. Turn the computer over. Remove the two securing screws from the bottom of the chassis. Step Size Quantity Screw Type LCD Module M2.5*8 3.
Page 82
All manuals and user guides at all-guides.com 4. Remove the adhesive tape securing the cables in place and pull the Antenna cables through the casing as shown. 5. Remove the cables from the cable channel as shown. Ensure that the cables are completely free of the retaining clips all the way to the hinge well.
Page 83
All manuals and user guides at all-guides.com 6. Disconnect the Power Board cable from the Mainboard. 7. Remove the cable from the cable channel as shown. Ensure that the cable is completely free of the retaining clips all the way to the hinge well. 8.
Page 84
All manuals and user guides at all-guides.com 9. Disconnect the MIC cable from the Mainboard as shown. Ensure that the cable is completely free of the retaining clips all the way to the hinge well. 10. Remove the four securing screws (two each side) from the LCD module. Step Size Quantity...
Page 85
All manuals and user guides at all-guides.com 11. Carefully remove the LCD module from the chassis. Chapter 3...
All manuals and user guides at all-guides.com Removing the Upper Cover 1. See “Removing the LCD Module” on page 71. 2. Turn the computer over. Remove the thirteen screws on the bottom panel. Step Size Quantity Screw Type Upper Cover M2.5*8 (red callout) Upper Cover...
Page 87
All manuals and user guides at all-guides.com 3. Turn the computer over. Remove the nine screws on the top panel. Step Size Quantity Screw Type Upper Cover M2.5*5 (red callout) Upper Cover M2.5*3 (blue callout) 4. Remove the adhesive tape holding the cables in place. Chapter 3...
Page 88
All manuals and user guides at all-guides.com 5. Disconnect the following cables from the Mainboard. 6. Disconnect A as shown. 7. Release the locking latch and remove B as shown. 8. Release the locking latch and remove C as shown. 9. Release the locking latch and remove D as shown. NOTE: Avoid pulling on cables directly to prevent damage to the connectors.
Page 89
All manuals and user guides at all-guides.com 10. Starting at the top-inside edges of the Upper Cover above the Battery Bay, lift the Upper Cover away from the Lower Cover as shown. 11. Work along the top edge prying the casing apart as shown. 12.
All manuals and user guides at all-guides.com Removing the TouchPad Bracket 1. See “Removing the Upper Cover” on page 76. 2. Release the FFC locking latch and disconnect the TouchPad FFC from the cover. 3. Remove the single screw securing the TouchPad Bracket to the Upper Cover. Step Size Quantity...
All manuals and user guides at all-guides.com Removing the Media Board FFC 1. See “Removing the Upper Cover” on page 76. 2. Lift the Media Board FFC as shown to release the adhesive securing it to the Upper Cover. 3. Pull the FFC through the Upper Cover as shown. Ensure that the cable passes through the casing completely. 4.
All manuals and user guides at all-guides.com Removing the LED Board 1. See “Removing the Upper Cover” on page 76. 2. Lift the right edge of the LED Board to release the adhesive securing the board to the Upper Cover. 3.
All manuals and user guides at all-guides.com Removing the Speaker Module 1. See “Removing the Upper Cover” on page 76. 2. Remove the four screws from the speaker modules. Step Size Quantity Screw Type Speaker Module M2*3 3. Remove the right side Speaker cable from the channel as shown. 4.
Page 94
All manuals and user guides at all-guides.com 5. Lift the entire Speaker assembly clear of the Upper Cover. Chapter 3...
All manuals and user guides at all-guides.com Removing the RTC Battery IMPORTANT:Follow local regulations for disposal of all batteries. 1. See “Removing the Upper Cover” on page 76. 2. The RTC Battery is soldered to the Mainboard. To replace the battery, solder the new battery to the connections shown.
All manuals and user guides at all-guides.com Removing the Modem Board 1. See “Removing the Upper Cover” on page 76. 2. Remove the two securing screws from the Modem Board. Step Size Quantity Screw Type Modem Board M2*3 3. Remove the adhesive tape securing the Modem cable to the Mainboard. Chapter 3...
Page 97
All manuals and user guides at all-guides.com 4. Lift the Modem Board away from the Mainboard, taking care not to damage the cable attached to the underside of the board. 5. Disconnect the cable from the underside of the Modem Board and lift the board clear of the chassis. Chapter 3...
All manuals and user guides at all-guides.com Removing the USB Board 1. See “Removing the Upper Cover” on page 76. 2. Disconnect the USB Board cable from the Mainboard connector. 3. Lift the USB cable away from Lower Cover to detach the adhesive. 4.
Page 99
All manuals and user guides at all-guides.com 5. Lift the USB Board out of the Lower Cover as shown. 6. Remove the USB Board cable from the board connector. Chapter 3...
All manuals and user guides at all-guides.com Removing the Mainboard 1. See “Removing the Modem Board” on page 86. 2. See “Removing the USB Board” on page 88. 3. Remove the single screw securing the Mainboard to the Lower Cover. Step Size Quantity...
All manuals and user guides at all-guides.com Removing the RJ-11 Jack 1. See “Removing the Mainboard” on page 90. 2. Remove the adhesive tape securing the RJ-11 cable to the Lower Cover. 3. Remove the RJ-11 cable from the cable channel. Ensure that the cable is free from all cable clips. 4.
Page 102
All manuals and user guides at all-guides.com 5. Lift the RJ-11 Jack away from the Lower Cover to detach the adhesive securing it in place. Chapter 3...
All manuals and user guides at all-guides.com Removing the CPU Fan 1. See “Removing the Mainboard” on page 90. 2. Disconnect the CPU Fan power cable from the Mainboard. 3. Remove the three securing screws from the CPU Fan. Step Size Quantity Screw Type...
All manuals and user guides at all-guides.com Removing the Thermal Module 1. See “Removing the Mainboard” on page 90. 2. Remove the four screws securing the Thermal Module to the Mainboard in reverse numerical order from 4 to 1. Step Size Quantity Screw Type...
All manuals and user guides at all-guides.com Removing the CPU 1. See “Removing the Thermal Module” on page 94. 2. Using a flat-bladed screw driver, rotate the CPU locking screw 180° counter-clockwise as shown. 3. Lift the CPU clear of the socket as shown. Chapter 3...
All manuals and user guides at all-guides.com LCD Module Disassembly Process LCD Module Disassembly Flowchart Remove LCD Panel from Main Unit before proceeding Remove LCD Bezel Remove Remove Remove Power Board LCD Panel Camera Module Remove Remove Remove Remove LCD FPC Cable LCD Brackets Antennas Microphone...
All manuals and user guides at all-guides.com Removing the LCD Bezel 1. See “Removing the LCD Module” on page 71. 2. Remove the four screw caps and six screws (four on the Bezel and two on the Hinge Covers). Step Size Quantity Screw Type...
All manuals and user guides at all-guides.com Removing the Camera Module 1. See “Removing the LCD Bezel” on page 97. 2. Disconnect the camera cable. 3. Remove the Camera from the module. Chapter 3...
All manuals and user guides at all-guides.com Removing the LCD Panel 1. See “Removing the Camera Module” on page 98. 2. Remove the two securing screws from the LCD Panel. Step Size Quantity Screw Type LCD Panel M2.5*5 3. Lift the LCD Panel out of the module, rear edge first, as shown. The LCD Module appears as follows when the LCD Panel is removed.
All manuals and user guides at all-guides.com Removing the Power Board 1. See “Removing the LCD Panel” on page 99. 2. Remove the single screw securing the Power Board Bracket to the LCD Module. Step Size Quantity Screw Type Power Board M2*3 3.
All manuals and user guides at all-guides.com Removing the LCD Brackets and FPC Cable 1. See “Removing the LCD Panel” on page 99. 2. Turn the LCD panel over to expose the rear. Lift the cable as shown to disengage the adhesive strip securing it in place.
Page 112
All manuals and user guides at all-guides.com 5. Remove the six securing screws (three on each side) from the LCD Panel brackets. Step Size Quantity Screw Type LCD Brackets M2*3 6. Remove the LCD Brackets by pulling away from the LCD Panel. Chapter 3...
All manuals and user guides at all-guides.com Removing the Microphone Module 1. See “Removing the LCD Panel” on page 99. 2. Remove the strips holding the microphone cable in place. Ensure the cable is free from obstructions. 3. Lift the Microphone Module clear of the module. Chapter 3...
All manuals and user guides at all-guides.com Removing the Antennas 1. See “Removing the LCD Panel” on page 99. 2. Starting from the right hinge, remove the white Antenna cable from the cable channel running along the bottom edge of the LCD Module. 3.
Page 115
All manuals and user guides at all-guides.com 4. Remove the adhesive tape (green callout) and lift the left side Antenna from the LCD module as shown. 5. Remove the adhesive strips holding the right Antenna cable in place. Ensure the cable is free from obstructions.
All manuals and user guides at all-guides.com LCD Module Reassembly Procedure Replacing the Antennas, Power Board, and MIC 1. Replace the left and right antennas as shown. Ensure that the locating pin on each antenna is correctly seated. Press down on the adhesive pads (green callout) to secure the antennas in place. Locating Pin Locating Pin 2.
Page 117
All manuals and user guides at all-guides.com 3. Replace the right antenna cable (black) as shown. 4. Place the Power Board in to the bracket as shown. Ensure that the cable is secured under each adhesive tab strip. 5. Place the Power Board Bracket in the LCD Module 6.
Page 118
All manuals and user guides at all-guides.com NOTE: The LCD Module appears as shown when the Antennas, Power Board, and MIC are replaced correctly. Chapter 3...
All manuals and user guides at all-guides.com Replacing the LCD Panel 1. Align the LCD brackets with the screw holes on the panel. 2. Starting with the top most screws (marked with ), replace the six screws in the brackets as shown. 3.
Page 120
All manuals and user guides at all-guides.com 6. Replace the LCD cable as shown an press down along the cable’s length to secure the cable to the panel. IMPORTANT:Ensure the cable is placed between the green callouts to avoid trapping when the panel is replaced.
All manuals and user guides at all-guides.com 8. Replace the two screws to secure the panel in the LCD Module. Replacing the Camera Module 1. Align the Camera Board with the locating pins and 2. Connect the cable to the Camera Board. place the camera in the LCD Module.
All manuals and user guides at all-guides.com Replacing the LCD Bezel 1. Locate the bezel bottom edge first and press down until there are no gaps between the bezel and the LCD Module. IMPORTANT: Ensure that the LCD cables pass through the hinge wells and are not trapped by the bezel. Chapter 3...
Page 123
All manuals and user guides at all-guides.com 2. Press down around the entire perimeter of the bezel until there are no gaps between the bezel and the LCD Module. 3. Replace the six screws as indicated. NOTE: The Bezel securing screws differ in size: Red callout—M2.5*5, Green callout—M2*4. Chapter 3...
All manuals and user guides at all-guides.com Main Module Reassembly Procedure Replacing the CPU IMPORTANT: The CPU has a Pin1 locator that must be positioned corresponding to the marker on the CPU socket. 1. Place the CPU into the CPU socket as shown, taking note of the Pin1 locator. Socket Pin1 Locator Pin1 Locator...
All manuals and user guides at all-guides.com 3. Align the four screw holes on the Thermal Module 4. Secure the four screws (in numerical order from and Mainboard and lower the module into place. screw 1 to screw 4) in the Thermal Module as Keep the module as level as possible to spread the shown.
All manuals and user guides at all-guides.com Replacing the RJ-11 Jack 1. Place the RJ-11 Jack in the Lower Cover as 2. Replace the cable bundle and press down to shown. secure the adhesive in place 3. Run the cable along the Lower Cover as shown, 4.
All manuals and user guides at all-guides.com Replacing the Mainboard 1. Ensure that the Mainboard is face up (the CPU is not visible). Place the Mainboard in the chassis, left side first (1), then rotate it downward into position (2). 2.
All manuals and user guides at all-guides.com Replacing the USB Board 1. Reconnect the USB Board cable to the USB 2. Align the locating holes and pins on the Lower Board. Cover and replace the USB Board. 3. Replace the single screw securing the board to the 4.
All manuals and user guides at all-guides.com Replacing the Modem Board 1. Reconnect the RJ-11 cable to the Modem Board. 2. Align the screw holes on the Modem and Lower Cover and replace the board. 3. Secure the cable in place with adhesive tape. 4.
All manuals and user guides at all-guides.com Replacing the Speaker Module 1. Place the left Speaker Module in the chassis as 2. Lift the mylar sheet away from the Upper Cover and shown, ensuring that the locating pins are seated run the Speaker cable along the Upper Cover using correctly.
All manuals and user guides at all-guides.com Replacing the LED Board 1. Pass the LED Board FFC through the Upper Cover 2. Place the LED Board in the Upper Cover and press as shown. down as indicated to secure the board in place. Replacing the Media Board FFC 1.
All manuals and user guides at all-guides.com Replacing the TouchPad Bracket 1. Replace the TouchPad Bracket bottom edge first to 2. Secure the bracket to the Upper Cover with a single engage the securing clips (1). Rotate the bracket screw. on to the Upper Cover and press down as indicated (2).
Page 133
All manuals and user guides at all-guides.com 2. Press down around the front and sides to secure the Upper Cover in place. NOTE: Ensure that there a no gaps between the Upper and Lower Covers. 3. Reconnect the following cables as shown. Chapter 3...
Page 134
All manuals and user guides at all-guides.com 4. Connect A as shown. 5. Insert B as shown and close the locking latch. 6. Insert C as shown and close the locking latch. 7. Insert D as shown and close the locking latch. 8.
Page 135
All manuals and user guides at all-guides.com 9. Replace the nine screws in the upper cover as shown. NOTE: The securing screws differ in size: Red callout—M2.5*5, Blue callout—M2.5*3. 10. Turn the computer over and replace the thirteen screws as shown. NOTE: The securing screws differ in size: Red callout—M2.5*8, Green callout—M2.5*5, Blue callout—M2.5*3.
All manuals and user guides at all-guides.com Replacing the LCD Module 1. Turn the computer over. Align the LCD hinges with the lower cover and replace the LCD module. 2. Replace the four securing screws (two each side), starting with the left side hinge. Ensure that the LCD cables are not trapped in the hinges.
Page 137
All manuals and user guides at all-guides.com 5. Run the LVDS cable along the cable channel as 6. Reconnect the LVDS cable to the Mainboard as shown, using all the available cable clips. shown. 7. Run the Power Board cable along the cable channel 8.
Page 138
All manuals and user guides at all-guides.com 11. Pull the Antennas completely through from the under side of the computer. 12. Secure the cables in place with adhesive tape. 13. Replace the two securing screws. Chapter 3...
All manuals and user guides at all-guides.com Replacing the Keyboard 1. Place the Keyboard face down on the TouchPad 2. Close the FFC locking latch to secure the cable in area.Reconnect the FFC as shown. place. 3. Turn the keyboard over and insert it front edge first 4.
All manuals and user guides at all-guides.com Replacing the Media Board 1. Align the Media Board with the transparent pane 2. Press the Media Board down to secure it in place on the Switch Cover. with adhesive. Chapter 3...
All manuals and user guides at all-guides.com Replacing the Switch Cover 1. Place the Switch Cover rear edge first on to the Upper Cover. Rotate the Switch Cover downward on the Keyboard. 2. Press down the edges of the cover to snap it into place, then press the centre down until it snaps in to place. 3.
Page 142
All manuals and user guides at all-guides.com 4. Lift the Media Board FFC cover as shown to 5. Connect the FFC to the Media Board as shown. expose the FFC connector. 6. Close the FFC locking latch to secure the FFC in 7.
All manuals and user guides at all-guides.com Replacing the Hard Disk Drive Modules 1. Place the HDD in the HDD carrier. 2. Replace the four screws (two each side) to secure the carrier. 3. Insert the Secondary HDD, right side first, and 4.
All manuals and user guides at all-guides.com Replacing the WLAN Module 1. Insert the WLAN Module into the WLAN socket. 2. Replace the single screw to secure the module. 3. Connect the two antenna cables to the module. 4. After connecting the cables to the terminals, secure the cables in place using adhesive tape.
All manuals and user guides at all-guides.com Replacing the ODD Module 1. Press the bezel into the tray, bottom edge first, to 2. Secure the ODD bracket with the two screws. secure it to the ODD Module. 3. Push the ODD Module into the ODD bay until it is 4.
Page 146
All manuals and user guides at all-guides.com 2. Replace the HDD1 Cover as shown. IMPORTANT:Press down around the perimeter of the covers to ensure that the all the securing tabs are correctly located in the casing. 3. Secure the five captive screws to hold the covers in place. HDD2, WLAN, and Memory Cover...
All manuals and user guides at all-guides.com Replacing the SD Dummy Card 1. Insert the SD Dummy Card into the slot and push until the card clicks into place and is flush with the casing. Replacing the Battery 1. Slide and hold the battery release latch to the 2.
Page 148
All manuals and user guides at all-guides.com Chapter 3...
All manuals and user guides at all-guides.com Chapter 4 Troubleshooting Common Problems Use the following procedure as a guide for computer problems. NOTE: The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses. Obtain the failing symptoms in as much detail as possible.
All manuals and user guides at all-guides.com Power On Issue If the system doesn’t power on, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Start Start Swap Swap Check AC/Battery AC/Battery Check AC/Batt only AC/Batt only...
All manuals and user guides at all-guides.com No Display Issue If the Display doesn’t work, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: START Replace CPU CPU OK? goto no p ower Power On ? trouble sho oting step...
All manuals and user guides at all-guides.com Abnormal Video Display If video displays abnormally, perform the following actions one at a time to correct the problem. Reboot the computer. If permanent vertical/horizontal lines or dark spots display in the same location, the LCD is faulty and should be replaced.
All manuals and user guides at all-guides.com LCD Failure If the LCD fails, perform the following actions one at a time to correct the problem. Do not replace non- defective FRUs: Start Check LCD Swap LCD panel/ Module LCD cable Swap M/B Built-In Keyboard Failure If the built-in Keyboard fails, perform the following actions one at a time to correct the problem.
All manuals and user guides at all-guides.com TouchPad Failure If the TouchPad doesn’t work, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Start Re-assemble the T/P FFC to Check M/B T/P FFC Swap/ Check Reassemble...
All manuals and user guides at all-guides.com Internal Speaker Failure If the internal Speakers fail, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Start Re-assemble Check M/B the speaker cable Speaker cable to M/B Check Swap speaker...
Page 156
All manuals and user guides at all-guides.com Remove and recently installed hardware or software. Restore system and file settings from a known good date using System Restore. If the issue is not fixed, repeat the preceding steps and select an earlier time and date. 10.
All manuals and user guides at all-guides.com Internal Microphone Failure If the internal Microphone fails, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Start Re-assemble the MIC cable Check M/B to M/B Mic cable Check MIC Swap MIC wire...
All manuals and user guides at all-guides.com HDD Not Operating Correctly If the HDD does not operate correctly, perform the following actions one at a time to correct the problem. Disconnect all external devices. Run a complete virus scan using up-to-date software to ensure the computer is virus free. Run the Windows 7 Startup Repair Utility: insert the Windows 7 Operating System DVD in the ODD and restart the computer.
All manuals and user guides at all-guides.com ODD Failure If the ODD fails, perform the following actions one at a time to correct the problem. Do not replace non- defective FRUs: S TA R T DV D / C D -R OM d rive r Insta ll it installe d? DV D /...
Page 160
All manuals and user guides at all-guides.com • LED does not flash when the computer starts up • The tray does not eject • Access failure screen displays • The ODD is noisy Perform the following general solutions one at a time to correct the problem. Reboot the computer and retry the operation.
Page 161
All manuals and user guides at all-guides.com Click OK. Ensure that the software used for burning discs is the factory default. If using different software, refer to the software's user manual. Playback is Choppy If playback is choppy or jumps, perform the following actions one at a time to correct the problem. Check that system resources are not running low: Try closing some applications.
Page 162
All manuals and user guides at all-guides.com Try an alternate cable, if available. If the drive works with the new cable, the original cable should be replaced. Replace the ODD. See “Disassembly Process” on page 50. Chapter 4...
All manuals and user guides at all-guides.com USB (Right Side) Failure If the right-side USB fails, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Start Re-assemble the USB/B Check cable to M/B USB/B to M/B cable Check...
All manuals and user guides at all-guides.com Wireless Function Failure If the WLAN fails, perform the following actions one at a time to correct the problem. Do not replace non- defective FRUs: Start Re-assemble the antenna to WL / Check antenna to WiMax card WL /WiMax card Check antenna...
All manuals and user guides at all-guides.com Bluetooth Function Test Failure If the Bluetooth function test fails, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Start Re-assemble BT Check BT cable Cable well connect Check BT cable...
All manuals and user guides at all-guides.com Easy Button Failure If the Easy Button fails, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: Start Re-assemble Check the function/B function/B FFC to M/B to M/B FFC Check Swap The...
All manuals and user guides at all-guides.com Thermal Unit Failure If the Thermal Unit fails, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs: START Fan power wire well Connect it well connected? Replace thermal Fan OK?
All manuals and user guides at all-guides.com Restart the computer. Remove any recently added hardware and associated software. Remove any recently added software and reboot. Restore system and file settings from a known good date using System Restore. If the issue is not fixed, repeat the preceding steps and select an earlier time and date. Run the Event Viewer to check the events log for errors.
All manuals and user guides at all-guides.com Motherboard CMOS Discharge If any problems such as incorrect CMOS settings, the CMOS data can be cleared by short-circuiting the CMOS CLRP2 jumpers. Open the memory bay door and short-circuit the jumpers near the DDR socket, using a metal conductivity tool.
Page 170
All manuals and user guides at all-guides.com Power-on the computer. Determine if the problem has changed. If the problem does not recur, reconnect the removed devices one at a time until you find the failing FRU. If the problem remains, replace the following FRU one at a time. Do not replace a non-defective FRU: •...
All manuals and user guides at all-guides.com Post Codes These tables describe the POST codes and descriptions during the POST. Chipset POST Codes The following table details the chipset POST codes and functions used in the POST. Sec: NO_EVICTION_MODE_DEBUG EQU 1 (CommonPlatform\sec\Ia32\SecCore.inc) Code Description 0xC2...
All manuals and user guides at all-guides.com Code Description 0x24 Program ODT 0x25 Perform steps required before memory init 0x26 Program the receive enable reference timing control register Program the DLL Timing Control Registers, RCOMP settings 0x27 Enable DRAM Channel I/O Buffers 0x28 Enable all clocks on populated rows 0x29...
Page 173
All manuals and user guides at all-guides.com Code Description 0xF8 Report that ExitBootServices () has been called 0xF9 Runtime driver set virtual address map Chapter 4...
All manuals and user guides at all-guides.com Chapter 5 Jumper and Connector Locations Top View Item Description JLVDS1 LCD Connector Internal MIC Power board Connector JKB1 Internal Keyboard Connector JMDC1 Internal MDC Connector JUSB2 USB Board connector JBT1 B/T connector Cap sensor board CONN JTP1 T/P Connector...
All manuals and user guides at all-guides.com LS-5022P USB Board Item Description JUSB1/JUSB2 USB Connector USB Board CONN LS-5024P Cap Sensor Board Item Description LED1 Power saving LED2 Backup key LED3 WLAN LED4 TP Luck LED5 Mute LED6 VOL DOWN LED7 VOL UP LS-5026P LED Board...
All manuals and user guides at all-guides.com Item Description LED2 Num LED LED3 Cap LED LED4 Media LED LS-5027P SW Board Item Description Power S/W Chapter 5...
This section provide you the standard operating procedures of clearing password and BIOS recovery for Packard Bell EasyNote LJ75/LJ77. Packard Bell EasyNote LJ75/LJ77 provides one Hardware Open Gap on main board for clearing password check, and one Hotkey for enabling BIOS Recovery.
Page 184
All manuals and user guides at all-guides.com Use an electric conductivity tool to short the two points of the HW Gap. Plug in AC, keep the short condition on the HW Gap, and press Power Button to power on the system till BIOS POST finish.
All manuals and user guides at all-guides.com BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed.
Page 186
All manuals and user guides at all-guides.com Chapter 5...
FRU (Field Replaceable Unit) List This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of Packard Bell EasyNote LJ75/ LJ77. Refer to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization).
All manuals and user guides at all-guides.com Base Assembly Description Acer P/N Touchpad Bracket 33.WBF02.002 Speaker 23.WBF02.002 Touchpad FCC 50.WBF02.002 Upper Cover 60.BE202.002 Chapter 6...
All manuals and user guides at all-guides.com Packard Bell EasyNote LJ75/LJ77 FRU List CATEGORY Description Part No. ADAPTER Adapter DELTA 65W 19V 1.7x5.5x11 Yellow ADP-65JH AP.06501.026 DB A, LV5 LED LF Adapter LITE-ON 65W 19V 1.7x5.5x11 Yellow PA- AP.06503.024 1650-22AC LV5 LED LF Adapter HIPRO 65W 19V 1.7x5.5x11 Yellow HP-...
Page 192
All manuals and user guides at all-guides.com CATEGORY Description Part No. Foxconn Wireless LAN Atheros HB93 1x2 BGN (HM) NI.23600.046 Liteon Wireless LAN Atheris HB93 1x2 BGN (HM) NI.23600.051 WN6602AH Liteon Wireless LAN Realtek 8192SE BGN NI.23600.055 WN6603LH(2x2) Lan Intel WLAN 112BN.HMWG MM#903341 KI.CPH01.001 CABLE BLUE TOOTH CABLE...
Page 193
All manuals and user guides at all-guides.com CATEGORY Description Part No. MIDDLE COVER - For WIN 7 60.WBV02.001 POWER BOARD BRACKET 33.WBF02.005 TP BRACKET 33.WBF02.002 MAIN HDD DOOR W/ RUBBER FOOT 42.WBF02.001 HDD CARRIER 33.WBF02.001 HDD DOOR FOR NB W/ 2 HDD 42.WBF02.002 CPU/PROCESSOR CPU Intel Core i3 330M PGA 2.13G 35W Arrandale,...
Page 194
All manuals and user guides at all-guides.com CATEGORY Description Part No. HDD WD 2.5" 5400rpm 250GB WD2500BEVT-22ZCT0 KH.25008.021 ML160 SATA LF F/W:11.01A11 HDD SEAGATE 2.5" 5400rpm 320GB ST9320325AS KH.32001.017 Wyatt SATA LF F/W:0001SDM1 HDD HGST 2.5" 5400rpm 320GB HTS545032B9A300 KH.32007.007 Panther B SATA LF F/W: C60F HDD WD 2.5"...
Page 195
All manuals and user guides at all-guides.com CATEGORY Description Part No. Keyboard GATEWAY GP-7T Black SJV70 Internal 17 KB.I170G.107 Standard 103KS Black Swiss/G Keyboard GATEWAY GP-7T Black SJV70 Internal 17 KB.I170G.090 Standard 103KS Black CZ/SK Keyboard GATEWAY GP-7T Black SJV70 Internal 17 KB.I170G.088 Standard 103KS Black Belgium Keyboard GATEWAY GP-7T Black SJV70 Internal 17...
Page 196
All manuals and user guides at all-guides.com CATEGORY Description Part No. BD COMBO MODULE ODD BD COMBO MODULE 6M.BGB02.002 ODD PLDS BD COMBO 12.7mm Tray DL 4X DS-4E1S KO.0040F.003 LF W/O bezel SATA (Windows 7) ODD BEZEL-BD COMBO 42.WBF02.005 ODD BRACKET 33.WBF02.003 ASSY LEC LCD MODULE 17.3"...
Page 197
All manuals and user guides at all-guides.com CATEGORY Description Part No. ANTENNA AUX (L) 50.WBF02.007 LCD BEZEL 60.WBF02.008 LVDS CABLE 50.WBF02.008 LCD BRACKET R+L 33.WBF02.004 CAMERA 0.3M 57.WBF02.001 MAINBOARD Mainboard NV79/ENLJ75/ENLJ77 UMA Intel HM55 LF MB.WHH02.001 Mainboard NV79/ENLJ75/ENLJ77 Park XT 512MB MB.WHH02.003 VRAM Intel HM55 LF Mainboard NV79/ENLJ75/ENLJ77 Madison Pro 1GB...
All manuals and user guides at all-guides.com CATEGORY Description Part No. NAME PLATE-ENLJ75 40.BH302.001 LCD SCREW RUBBER 47.WBF02.001 PVC MYLAR FOR LCD COVER-LEFT 47.WBU02.001 Screw List CATEGORY Description Part No. SCREW SCREW M2.45D 8.0L K 5.5D 0.8T ZKNL 86.WBF02.001 SCREW M2.5D 5L K 5.5D ZK NL + CR3 86.WBF02.010 SCREW M2.46D 3.0L K 5.5D 0.8T ZKNL 86.WBF02.002...
Page 199
All manuals and user guides at all-guides.com Chapter 6...
All manuals and user guides at all-guides.com Appendix A Model Definition and Configuration Packard Bell EasyNote LJ75 Series Model Acer Part No Country Description ENLJ75- LX.BG902.005 EMEA Spain ENLJ75-334G64Mn W7HP64BTES1 334G64Mn MADISON_PRO1GBCkk_V3 2*2G/640/6L2.2/ 5R/CB_GN_0.3D_GEk_ESA2 EASYNOTE_LJ75-JN-332SP ENLJ75- LX.BG902.004 EMEA Spain ENLJ75-434G50Mn W7HP64BTES1...
Page 201
All manuals and user guides at all-guides.com Model Acer Part No Country Description ENLJ75- LX.BG902.009 EMEA Italy ENLJ75-434G32Mn W7HP64BTIT1 434G32Mn MADISON_PRO1GBCkk_V3 2*2G/320/6L2.2/ 5R/CB_GN_0.3D_GEk_IT71 EASYNOTE_LJ75-JO-110IT ENLJ75- LX.BG902.007 EMEA France ENLJ75-434G50Mn W7HP64BTFR1 434G50Mn MADISON_PRO1GBCkk_V3 2*2G/500_L/ 6L2.2/5R/CB_GN_0.3D_GEk_FR51 EASYNOTE_LJ75-JO-256FR ENLJ75- LX.BG902.006 EMEA France ENLJ75-624G50Mn W7HP64BTFR1 624G50Mn MADISON_PRO1GBCkk_V3 2*2G/500_L/ 6L2.2/5R/CB_GN_0.3D_GEk_FR51...
Page 202
All manuals and user guides at all-guides.com Model Acer Part No Country Description ENLJ75- LX.BH302.002 EMEA France ENLJ75-334G50Mn W7HP64BTFR1 334G50Mn PARK_XT512Ckk_V3 2*2G/500_L/6L2.2/5R/ CB_GN_0.3D_GEk_FR51 EASYNOTE_LJ75- JN-253FR ENLJ75- LX.BH302.001 EMEA Germany ENLJ75-434G32Mn W7HP64BTDE1 434G32Mn PARK_XT512Ckk_V3 2*2G/320/BT/6L2.2/5R/ CB_GN_0.3D_GEk_DE43 EASYNOTE_LJ75- JO-070GE ENLJ75- S2.BH302.001 ENLJ75-544G32Mi W7HP64BWW2 544G32Mi PARK_XT512Ckk_V3 2*2G/320/BT/6L2.2/5R/ CB_abgn_0.3D_GEk_EN11...
Page 203
All manuals and user guides at all-guides.com Model Acer Part No VGA Chip VRAM 1 ENLJ75- LX.BG902.010 Ci3330M NLED17.3W MADISON_PRO 1G-DDR3 (64*16*8) 334G64Mn XGA+G ENLJ75- LX.BG902.002 Ci3330M NLED17.3W MADISON_PRO 1G-DDR3 (64*16*8) 334G50Mn XGA+G ENLJ75- LX.BG902.009 Ci5430M NLED17.3W MADISON_PRO 1G-DDR3 (64*16*8) 434G32Mn XGA+G ENLJ75-...
Page 204
All manuals and user guides at all-guides.com Memory Memory Model Acer Part No Memory 1 Memory 2 HDD 1(GB) ENLJ75- LX.BG902.005 SO2GBIII10 SO2GBIII10 N640GB5.4KS 334G64Mn ENLJ75- LX.BG902.004 SO2GBIII10 SO2GBIII10 N500GB5.4KS 434G50Mn ENLJ75- LX.BG902.014 SO2GBIII10 SO4GBIII10 N500GB5.4KS 436G50Bn ENLJ75- LX.BG902.001 SO2GBIII10 SO2GBIII10 N500GB5.4KS 434G1TMn...
Page 205
All manuals and user guides at all-guides.com Memory Memory Model Acer Part No Memory 1 Memory 2 HDD 1(GB) ENLJ75- LX.BH302.002 SO2GBIII10 SO2GBIII10 N500GB5.4KS 334G50Mn ENLJ75- LX.BH302.001 SO2GBIII10 SO2GBIII10 N320GB5.4KS 434G32Mn ENLJ75- S2.BH302.001 SO2GBIII10 SO2GBIII10 N320GB5.4KS 544G32Mi ENLJ75- LX.BGB02.005 SO2GBIII10 SO2GBIII10 N320GB5.4KS 334G32Mn...
Page 206
All manuals and user guides at all-guides.com Media Extra Card Model Acer Part No HDD 2(GB) Processor Reader ENLJ75- LX.BG902.006 NSM8XS 5 in 1- 624G50Mn Build in ENLJ75- LX.BG902.003 NSM8XS 5 in 1- 434G64Mn Build in ENLJ75- S2.BG902.002 NSM8XS 5 in 1- 524G50Mi Build in ENLJ75-...
Page 207
All manuals and user guides at all-guides.com Wireless VOIP Finger Model Acer Part No Bluetooth LAN1 Phone Print Chipset ENLJ75- LX.BG902.014 3rd WiFi 2x2 HM55 436G50Bn ENLJ75- LX.BG902.001 3rd WiFi 2x2 HM55 434G1TMn ENLJ75- LX.BG902.008 3rd WiFi 2x2 HM55 434G1TBn ENLJ75- LX.BG902.013 3rd WiFi 2x2...
Page 208
All manuals and user guides at all-guides.com Wireless VOIP Finger Model Acer Part No Bluetooth LAN1 Phone Print Chipset ENLJ75- S2.BH302.001 INT6200H BT 2.1 HM55 544G32Mi ENLJ75- LX.BGB02.005 3rd WiFi 2x2 HM55 334G32Mn ENLJ75- LX.BGB02.004 3rd WiFi 2x2 HM55 334G32Mn ENLJ75- LX.BGB02.001 3rd WiFi 2x2...
All manuals and user guides at all-guides.com Packard Bell EasyNote LJ77 Series Model Acer Part No Country Description ENLJ77- S2.BGA02.001 ENLJ77-543G50Mn W7HP64BWW2 543G50Mn MADISON_PRO1GBCrk_V3 2G+1G/500_L/BT/ 6L2.2/5R/CB_GN_0.3D_GEr_EN11 ENLJ77- S2.BH402.001 ENLJ77-544G50Mi W7HP64BWW2 544G50Mi PARK_XT512Crk_V3 2*2G/500_L/BT/6L2.2/5R/ CB_abgn_0.3D_GEk_EN11 ENLJ77- S2.BGC02.00 ENLJ77-543G32Bn W7HP64BWW2 UMACrk 543G32Bn 2G+1G/320/BT/6L2.2/5R/...
Page 210
All manuals and user guides at all-guides.com VOIP Finger Model Acer Part No Wireless LAN1 Bluetooth NB Chipset Phone Print ENLJ77- S2.BGA02.001 3rd WiFi 2x2 BGN BT 2.1 HM55 543G50 ENLJ77- S2.BH402.001 INT6200H BT 2.1 HM55 544G50 ENLJ77- S2.BGC02.001 3rd WiFi 2x2 BGN BT 2.1 HM55 543G32B...
Refer to the following lists for components, adapter cards, and peripherals which have passed these tests. Regarding configuration, combination and test procedures, please refer to the Packard Bell EasyNote LJ75/ LJ77 Compatibility Test Report released by the Acer Mobile System Testing Department.
All manuals and user guides at all-guides.com Microsoft Windows 7 Environment Test ® ® Vendor Type Description 2nd HDD HGST N160GB5.4KS HDD HGST 2.5" 5400rpm 160GB HTS545016B9A300 Panther B SATA LF F/W:C60F HGST N250GB5.4KS HDD HGST 2.5" 5400rpm 250GB HTS545025B9A300 Panther B SATA LF F/W:C60F HGST N320GB5.4KS...
Page 213
All manuals and user guides at all-guides.com Vendor Type Description SONY 8CELL2.4 Battery SONY AS-2007B Li-Ion 4S2P SONY 8 cell 4800mAh Main COMMON Bluetooth Foxconn BT 2.1 Foxconn Bluetooth BRM 2046 BT2.1 (T60H928.33) f/ w:861 Camera Chicony 0.3M DV Chicony 0.3M DV Calla_2G Suyin 0.3M DV Suyin 0.3M DV Camellia_2G...
Page 214
All manuals and user guides at all-guides.com Vendor Type Description NLED17.3WXGA+G LED LCD CMO 17.3" WXGA+ Glare N173O6-L02 LF 220nit 8ms 600:1 NLED17.3WXGA+G LED LCD LPL 17.3" WXGA+ Glare LP173WD1-TLA1 LF 220nit 8ms 600:1 SAMSUNG NLED17.3WXGA+G LED LCD SAMSUNG 17.3" WXGA+ Glare LTN173KT01-A01 LF 220nit 8ms 600:1 A-DATA SO2GBIII10...
Page 215
All manuals and user guides at all-guides.com Vendor Type Description VGA Chip MADISON_PRO AMD MADISON_PRO 40nm 29mm*29mm M2 package PARK_XT AMD PARK_XT 40nm 29mm*29mm M2 package None UMA (Intel) VRAM 1G-DDR3 (64*16*8) 1G-DDR3 64*16*8 512M-DDR3 512M-DDR3 64*16*4 (64*16*4) WiFi Antenna PIFA PIFA Wireless LAN...
Page 216
All manuals and user guides at all-guides.com Appendix B...
Page 217
All manuals and user guides at all-guides.com Appendix C Online Support Information This section describes online technical support services available to help you repair your Acer Systems. If you are a distributor, dealer, ASP or TPM, please refer your technical queries to your local Acer branch office.
Page 218
All manuals and user guides at all-guides.com Appendix C...
Page 219
All manuals and user guides at all-guides.com Index EasyTouch Failure External Module Disassembly AFLASH Utility Flowchart Antennas Removing Features Flash Utility Battery Pack FPC Cable Removing Removing Replacing Replacing BIOS FRU (Field Replaceable Unit) List ROM type vendor Version 27–39 Hard Disk Drive Modules BIOS Utility Replacing...
Page 220
All manuals and user guides at all-guides.com Replacing LCD Brackets No Display Issue Removing Replacing LCD Failure ODD Failure LCD Module ODD Module Removing Replacing Removing Replacing LCD Module Disassembly Online Support Information Flowchart LCD Module Reassembly Procedure LCD Panel Panel Removing Replacing...
Page 221
All manuals and user guides at all-guides.com Test Compatible Components Thermal Grease Thermal Module Removing Replacing Thermal Unit Failure TouchPad Bracket Removing Replacing TouchPad Failure Troubleshooting Built-in KB Failure EasyTouch Buttons HDTV Switch Internal Microphone Internal Speakers LCD Failure No Display Other Failures Power On Thermal Unit...
Page 222
All manuals and user guides at all-guides.com...