Packard Bell EasyNote LJ75 Service Manual page 117

3. Replace the right antenna cable (black) as shown.
Ensure that the cable is secured under each
adhesive tab strip.
5. Place the Power Board Bracket in the LCD Module
as shown.
7. Place the Microphone Module in the LCD Module,
as shown, and press down to secure it in place.
Chapter 3
All manuals and user guides at all-guides.com
4. Place the Power Board in to the bracket as shown.
6. Replace the single screw to secure the bracket in
place.
8. Run the cable as shown and secure it using the
adhesive tabs.
107