Removing The Lcd Brackets And Fpc Cable - Packard Bell EasyNote LJ75 Service Manual

Removing the LCD Brackets and FPC Cable

1. See "Removing the LCD Panel" on page 99.
2. Turn the LCD panel over to expose the rear. Lift the cable as shown to disengage the adhesive strip securing it
in place.
3. Remove the adhesive tape and lift the adhesive protector securing the cable to the LCD Panel.
4. Disconnect the cable from the panel connector and lift the FPC cable from the panel.
Chapter 3
All manuals and user guides at all-guides.com
101