Product Usage; Care And Cleaning; Electrical Equipment Waste Disposal - KitchenAid 5KEK1565 Owner's Manual

Electric water kettle
Hide thumbs Also See for 5KEK1565:
Table of Contents

Advertisement

PRODUCT USAGE

OPERATING THE ELECTRIC KETTLE
Before using your Electric Kettle for the first time, wash the Kettle and Lid in hot, soapy water,
then rinse with clean water and dry. Fill the Electric Kettle with water to the MAX fill line; boil the
water and then discard. To avoid damage, do not fully immerse the Electric Kettle in water, and
do not use abrasive cleaners or scouring pads.
1.
Open the Lid of the Electric Kettle by pressing the Lid Release Button, then fill the Electric
Kettle with clean, cold water.
NOTE: Water must be at or above the MIN fill line for the Electric Kettle to operate. Do not
exceed the MAX fill line.
2.
Push the Lid down so that it is completely closed.
3.
Place the Electric Kettle on the Base, and plug the Power Cord into an earthed outlet.
4.
Flip the ON/OFF switch down; the ON indicator will light and the Electric Kettle will begin
heating the water.
5.
Once the water reaches boiling, the Electric Kettle will turn off automatically; the
ON/OFF switch will flip up, and the indicator light will dim to indicate that heating is
complete.
IMPORTANT: Be sure to unplug the cord when the Electric Kettle is not in use.

CARE AND CLEANING

CLEANING THE ELECTRIC KETTLE
IMPORTANT: Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
1.
The exterior of the Electric Kettle may be cleaned with a damp cloth. Dry and polish the
Electric Kettle with a soft cloth. Abrasives and scouring agents of any kind are not
recommended.
DESCALING THE ELECTRIC KETTLE
To get the best performance from your Electric Kettle, decalcification will be necessary.
Calcium deposits may form on the interior metal parts of the Electric Kettle. The cleaning
interval will depend on the hardness of the water you put in the Electric Kettle.
1.
Fill the Electric Kettle with 0.25 L white vinegar. Add 0.75 L water. Boil and allow to stand
overnight before emptying the solution.
2.
Fill the Electric Kettle with water, bring to a boil, and drain out the water. Repeat this step
twice. The Electric Kettle is now ready to use.

ELECTRICAL EQUIPMENT WASTE DISPOSAL

DISPOSAL OF PACKING MATERIAL
The packing material is recyclable and is marked with the recycle symbol
of the packing must therefore be disposed of responsibly and in full compliance with local
authority regulations governing waste disposal.
6
. The various parts

Advertisement

Table of Contents
loading

Table of Contents