Dmx-Controlled Operation; Dmx-Protocol - EuroLite LED ML-56 COB RGBW 3X30W NSP FLOOR User Manual

WT.01-
CAL1
WT.11
CAL2 RGBW

DMX-controlled operation

The device has 4 DMX-modes. The Control Board allows you, as described above, to assign the DMX-Mode.
You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED ML-56 COB RGBW 3X30W NSP FLOOR will respond to the controller.
Please, be sure that you don't have any overlapping channels in order to control each LED ML-56 COB
RGBW 3X30W NSP FLOOR correctly and independently from any other fixture on the DMX-chain.
If several LED ML-56 COB RGBW 3X30W NSP FLOOR are addressed similarly, they will work
synchronically.
If you set, for example, the address in the 10 channel mode to channel 11, the device will use the channels
11 to 20 for control.
Controlling:
After having addressed the LED ML-56 COB RGBW 3X30W NSP FLOOR, you may now start operating it via
your lighting controller.

DMX-protocol

Mode/Channel
ARC.1 STRG AR2.5
4 CH 6 CH 10 CH
1 1 1
2 2 2
3 3 3
4 4 4
5 5
R.000 (000-255)
G.000 (000-255)
B.000 (000-255)
W.000 (000-255)
R.000 (025-255)
G.000 (025-255)
B.000 (025-255)
W.000 (025-255)
Decimal Hexad.
HSV.
3 CH
1
0 255 00
2
0 255 00
3
0 255 00
0 255 00
0 255 00
0 255 00
0 255 00
0 255 00
Color presets
With this function you can make 11 color preset
settings (WT.01-WT.11), which can be called up
via DMX.
White balance (s. SET - RGBW)
Percentage
FF 0% 100%
FF 0% 100%
FF 0% 100%
FF 0% 100%
FF 0% 100%
FF 0% 100%
FF 0% 100%
FF 0% 100%
25/28
S/F Feature
Hue
F Hue selection
Saturation
F 0 - 100 % increasing
Value (brightness)
F 0 - 100 % increasing
Red
F Red 0 - 100 % increasing
Green
F Green 0 - 100 % increasing
Blue
F Blue 0 - 100 % increasing
White
F White 0 - 100 % increasing
Dimmer intensity
Gradual adjustment of the
F dimmer intensity from 0 to 100
00089492, Version 1.0