Table of Contents
Advertisement
to flash, indicating the Internet Camera is changing to factory
reset. When factory reset is completed, the Internet Camera will
default to channel 11. This default setting will let the Internet
Camera connect to ANY access point on the infrastructure
network. The IP address will also return to the default setting
(192.168.0.30).
3. I/O Connector
The camera provides the I/O connectors on the rear panel (pin 1/2
are for RS485, pin 3/4 are for input, pin 5/6 are for output), which
provide the physical interface to send and receive digital signals
to a variety of external alarm devices. For more information, refer
to Appendix F, I/O Terminal Application.
4. DC Power Connector
The DC power input connector is located on the Internet
Camera's rear panel, and is labeled DC5V with a single jack
socket to supply power to the Internet Camera. Power will be
generated when the power supply is connected to a wall outlet.
14
Advertisement
Table of Contents
