Table of Contents
Advertisement
Rear Panel
2. Reset Button
3. I/O Connector
1. Network Cable Connector
4. DC Power Connector
1. Network Cable Connector
The Internet Camera's rear panel features an RJ-45 connector for
connections to 10Base-T Ethernet cabling or 100Base-TX Fast
Ethernet cabling (which should be Category 5 twisted-pair cable).
The port supports Auto-MDIX, allowing the Internet Camera to
automatically detect or negotiate the transmission speed of the
network.
2. Reset Button
Reset will be initiated when the reset button is pressed once. The
Power LED begins to flash.
Factory Reset will be initiated when the reset button is pressed
continuously for three seconds or when Power LED begins to
light up. Release the reset button and the Power LED will begin
13
Advertisement
Table of Contents
