Table of Contents
Advertisement
5.
Open "Switch type". Choose appropriate "Voice Encoding" scheme. The
setting should be consistent with RVS-COM in step (3).
Now you are ready to use the RVS-COM's Softmodem function. Refer to the
RVS-COM on-line documentation for application details.
Making G3 Fax over ISDN
1.
Start CommCenter.
2.
Open the SoftwareFax tab. Select "Use SoftwareFax to receive fax" to
receive a fax. Or select "Use SoftwareFax to send fax" to send a fax.
3.
Open "ISDN" tab. Select appropriate ISDN voice encoding scheme for
your location. Generally, you should select "A-law" for European
countries, "Mu-law" for North America
4.
Open the Service tab. Select Accept calls. Select Fax. Click OK.
Sending a fax
1.
Start Create New Fax in the RVS-COM group programs. Click OK.
2.
Follow the on-screen instruction to enter the necessary information.
When all set, RVS will send out the fax for you automatically.
Receiving a fax
3.
Wait for incoming fax calls.
4.
You can go to Inbox to read the incoming fax.
- 47 -
Advertisement
Table of Contents
