Table of Contents
Advertisement
5.
Name the new connection appropriately. For example, "V.110".
6.
Select "Intelligent PCMCIA ISDN TA (modem)" in the "Select a
device" box.
7.
Click Configure, and specify the V.110 user rate in the Maximum speed
box. Click Next.
Maximum speed=1200
Maximum speed=2400
Maximum speed=4800
Maximum speed=9600
Maximum speed=19200 V.110 user rate = 19200 bps.
Maximum speed=38400 V.110 user rate = 38400 bps.
Maximum speed=57600 V.110 user rate = 57600 bps*
If the maximum speed you selected is not listed above, the system will
automatically adapt the V.110 user rate to the default setting at 38400
bps.
8.
Enter the ISDN phone number of the remote party that you want to call.
9.
Click "Next", and click "Finish" to complete the setting.
Making V.120 Connections
1.
Execute "Config" in "Configuration Utility".
2.
Select COM Port Setting tab. Select "V.120" for "B-Channel protocol"
st
in "1
COM port setting".
3.
Go to My Computer. Make sure "Dial-Up Networking" (DUN) is well
installed.
4.
Double-click Make New Connection.
5.
Name the new connection appropriately. For example, "V.120".
6.
Select "Intelligent PCMCIA ISDN TA (modem)" in the "Select a
device" box.
V.110 user rate = 1200 bps.
V.110 user rate = 2400 bps.
V.110 user rate = 4800 bps.
V.110 user rate = 9600 bps.
* Available only for Japan
- 13 -
Advertisement
Table of Contents
