Table of Contents
Advertisement
3.
Run Windows 95 "Hypertrm". Name the new connection appropriately.
For example, "RVS_X75". Click "OK".
4.
Enter the ISDN phone number that you want to connect to.
5.
Select "RVS ISDN X.75 transparent" in "Connect using" box. Click
"OK".
6.
Click "Dial" button to make dialing.
After establish the ISDN link, you can use the data transmission protocol, such
as Z-modem or X-modem, for data transfer.
For servers which support X.75 T.70NL protocol, you have to choose "RVS
ISDN X.75 T.70NL" in the above setup steps.
EuroFile Transfer Applications
1.
Start RVS CommCenter. If your are to act as an answering party (host
mode), check Accept calls, otherwise disselect this box to act as the
calling party. Check Eurofile transfer.
2.
Start the RVS TransferMaster. The New Connection dialog appears.
- 24 -
Advertisement
Table of Contents
