Table of Contents
Advertisement
15. If you are not new of using Dial-up Networking, click "New" command
button. If this is your first connection, just skip it. Give a name for the
new connection. For example, "RVS_PPP". Click "Next".
16. Select "Send my plain text password..." (recommended). Click "Next".
17. Select "RVS ISDN Internet PPP (COM#)". Click " Next".
18. Give the phone number that you want to dial to. Click "Next".
19. Click "Finish".
20. Click "Dial" to make connection immediately. Or click "Close" to wait
for later PPP applications.
Making Multilink PPP connections
1. Perform the above steps in the previous section to complete the PPP
connection.
2. Run RVS-COM "CommCenter". If only one COM port is assigned, you
have to add another ISDN port.
3. Click the "Add" command button. Select "An ISDN channel on your
local PC". Click "Next". Assign a free COM port for the second ISDN
port. Click "Next". Click "Finish".
4. Make sure the second ISDN port "ISDN2" is activated (the check box is
selected). Click "OK".
5. Enter "Control Panel"
6. Select "Don't detect my modem; I will select it from a list". Click
"Next".
7. Select "RVS Datentechnik" – "RVS ISDN Internet PPP". Click
"Next".
8. Select the COM port that you just assigned at step (2). Click "Next".
9. Click "Finish".
10. Now you will see "RVS ISDN Internet PPP #2" in the modem
properties listed in "Control Panel"
11. Click "Yes", when "Modem Setup" window appears.
12. Click "Add" in "Remote Access Setup" dialog box.
"Modems". Click "Add" button.
"Modems". Click "Close".
- 45 -
Advertisement
Table of Contents
