Table of Contents
Advertisement
13. Select "COM# RVS ISDN Internet PPP #2" in RAS device list. Click
"OK".
14. Click "Continue". Then, re-start Windows NT.
15. Run RVS-COM "CommCenter".
16. Double click "Dial-Up Networking" in "My Computer".
17. If you are not new of using Dial-up Networking, click "New" command
button. If this is your first connection, just skip it. Give the new
connection name. For example, "RVS_MP". Click "Next".
18. Select "Send my plain text password..." (recommended). Click "Next".
19. Select "RVS ISDN Internet PPP (COM#)". Click " Next".
20. Give the phone number that you want to dial to. Click "Next".
21. Click "Finish".
22. Click "More" command button.
23. Select "Edit entry and modem properties". Open "Basic" tab. Select
"Multiple Lines" in "Dial using" box.
24. Click "Configure..." command button. Enable (tick) "RVS ISDN
25. Internet PPP #2...).
26. Click "Phone numbers...". Give the 2
Multilink PPP connections, if any. If your ISP just support single phone
number for Multilink PPP connections, you must enter the number here.
Click "Add". Click "OK" to complete the configuration.
Making "Modem over ISDN" Connections (Using CAPI software)
Using RVS-COM Softmodem
1.
Run RVS-COM "CommCenter".
2.
Enter "Softmodem" tab. Enable "Use Softmodem". Click "Apply" and
"OK".
3.
Open "ISDN" tab. Select appropriate ISDN voice encoding scheme for
your location. Generally "A-law" is for European countries, and "Mu-
law" for North America.
4.
Run "Config" in "Configuration Utility".
nd
ISDN phone number for your
- 46 -
Advertisement
Table of Contents
