3.
Click Configure.... Select "RVS Port (COM#)". Click OK.
4.
Click Next. Enter the ISDN phone number of your ISP. Click Next.
5.
Click "Finish". Now you are ready for Internet access through CAPI.
Making Multilink PPP Connections
There are two ways to setup the ISDN PC Card for Multilink PPP (MP or
MLP) connections through CAPI mode.
Method 1
1.
Execute RVSCommCenter.
2.
Complete the PPP connection setup in the previous section.
3.
Execute Config. (Start->Programs->Configuration Utility).
4.
Open the General tab. Click "MP Enabled" in "PPP Setting". Apply the
other settings, "BOD Enabled" and "Second Phone No." if available.
5.
Now you are ready for Internet access.
- 18 -