Advertisement
Install the Inflatable Seal
Liberally lubricate the ram plate channel and seals with
sanitary grease before reassembly, checking that the
inflatable seal is evenly positioned within the channel.
1. Insert the stem into the tunnel first. The base of the
stem must be properly aligned with the access hole.
Failure to properly align the stem base may
result in stem damage and/or faulty operation.
F
. 9
IG
309549B
2. Continue sliding the top edge of the seal over the
lower edge of the plate. Be sure to maintain the seal
stem position relative to the plate. The seal is
designed to stretch a small amount to fit snugly
inside the plate groove.
F
. 10
IG
3. Reconnect the air tube to the seal fitting. Tempo-
rarily inflate the seal to ensure proper operation.
F
. 11
IG
Cleaning
A
TI4015a
11
Advertisement
