DSC WS900 User Manual page 8

Chapter 2.0 General System Operation
Cellular Signal Strength
Status Light LED indicator
ON Steady ( green)
ON Steady ( yellow)
ON Steady (red)
Flashes red for a few seconds,
then flashes green
Remote Connection Status
Status Light LED indicator
ON Steady ( green)
ON Flash (red)
OFF
ON Flash (green)
Flashes red for a few
seconds, then flashes green
Description
Cellular is active with a strong s ignal con-
nection.
Cellular is active with a weak s ignal con-
nection.
There is no signal or no connection, but a
connection is expected.
System Test
All status LEDs flash at the same time.
Description
The link is active with Tyco On or third p arty
server.
The link activates but fails to c ommunicate with
Tyco On or third p arty server.
The link is not yet active with T yco On or third
party server..
The link is activeTyco On or third p arty server
and Installer Access is available.
System Test
All status LEDs flash at the same time.
- 8 -