Chapter 2.0 General System Operation
Armed
Status Light
LED indicator
ON Steady
Flashing
OFF
Trouble
Status Light
LED indicator
ON Steady
Flashing
[cadence of 500ms
On/500ms OFF]
Flashing
[cadence of 250ms
ON/250ms OFF/250ms
ON/750ms OFF]
Flashing
[cadence of 250ms
ON/250ms OFF/250ms
ON/250ms OFF/250ms
ON/750ms OFF]
Flashing
Flashing
OFF
WiFi Signal Strength
Status Light
LED indicator
ON Steady ( green)
ON Steady (yellow)
ON Steady (red)
ON Flashing ( red).
Flashes red f or several
seconds, then flashes
green
OFF
Description
The partition is armed..
The system in Alarm.
Note: Silent a larms or panic do not flash the Alarm
LED.
System Test
All status LEDs flash at the same time.
Installer Walk Test
Ready, Trouble, and Arm LEDs flash at the same
time.
The partition is disarmed
Description
A system trouble is present.
[*][2] The Trouble menu is accessed.
The system is in the second-level submenu.
The system is in the third-level submenu.
System Test
All status LEDs flash at the same time.
Installer Walk Test
Ready, Trouble, and Arm LEDs flash at the same
time.
System troubles are cleared.
Description
The radio is active with a strong s ignal connection.
The radio is active with a weak signal connection.
There is no signal.
There was hardware network reset.
System Test
All status LEDs flash at the same time.
Client Mode is OFF.
- 7 -