Midea B7+ Instruction Manual page 4

Product Maintenance
Dust cleaning: To maintain the suction power of the vacuum cleaner, please clean the dust regularly.
Change the dust bag:
01
When the wind indicator turns to be red, it is time to clear the dust or replace with a new bag.
Open the front cover by clipping. Take out the bag then remove the full dust bag.
Exchange the outlet filter:
02
Clip down and remove the outlet cover by hands for exchange of filter.
The motor protection filter should be cleaned or exchanged after it is dirt.
03
6
TROUBLESHOOTING
In case of malfunction, please refer to the following table
Problem Possible reason
The vacuum
- too much dust in the bag
cleaner does - filter is blocked
not switch on - brush duct is blocked
- hasn't been fully dried after washing
The machine
- The power plugs are loose on the socket or
does not work the power socket is not live
-The switch fails to be opened
The machine - The dust bag is full
suddenly stops
- The sponge filter is blocked
- Suction inlet of brush or the other accessory
is blocked
If the problem still can't be solved, please contact local service center.
Solution
- empty the dust bag in time
- clean the sponge filter
- clean the blockage
- dry the sponge filter in cool place after washing
- Inspect whether power plugs are tight or not or
the socket is live or not
- Press the switch button
- empty the dust bag in time
- clean the sponge filter
- clean the blockage
7