Advertisement

Quick Links

FRONT PAGE
RACPWS22
RACPWS23

Advertisement

Table of Contents
loading

Summary of Contents for Ryobi RACPWS22

  • Page 1 FRONT PAGE RACPWS22 RACPWS23...
  • Page 2: Intended Use

    safety glasses and be kept at a safe IMPORTANT! distance from the work area. It is essential that you read the instructions ■ Ensure that the safety devices are in good in this manual before assembling, operating, working condition. Make sure that all safety and maintaining the product.
  • Page 3: Electrical Safety Warnings

    ELECTRICAL SAFETY WARNINGS ■ Before starting any cleaning operation, close doors and windows. Clear the area to ■ The plug must match the outlet. Never be cleaned of debris, toys, outdoor furniture, modify the plug in any way. Unmodified or other objects that could create a hazard. plugs and matching outlets reduces the risk of electric shock.
  • Page 4: Overload Protection

    TRANSPORTATION AND STORAGE ■ Regularly inspect and maintain the product CAUTION! Mind the weight of the product for safe operation. RYOBI recommends when selecting the storage location and during inspecting the product every 6 months. transportation to prevent accidents or injuries.
  • Page 5: Symbols On The Product

    ■ Overload protection Waste electrical products – A thermal sensor protects the product should not be disposed of with from overloading. The product will household waste. Recycle automatically shut the power down while overheating. where facilities exist. Check with your local authority or SYMBOLS ON THE PRODUCT retailer for recycling advice.
  • Page 7 RACPWS22 RACPWS23 Carry handle Hose hanger Vario lance Water inlet filter Lance hook Operator’s manual O-rings High pressure hose Nozzle cleaning tool Power cord holder On/off switch Power cord Water inlet port Detergent tank cap Detergent tank Wheel Hose release button...
  • Page 8 Wear full eye and ear protection, Push down the trigger handle holder Attach the carry handle onto the protective gloves, substantial footwear, until the buttons click, securing the product. and long trousers at all times while handle in place. Push down the power operating the product.
  • Page 9 Secure the carry handle in place using Attach the hose hanger onto the carry Secure the hose hanger using handle screws. Turn the handle screws clockwise to tighten. handle screws. Turn the handle screws handle. clockwise to tighten. Insert the high pressure hose into the On one end of the garden hose insert a hose coupler.
  • Page 10 Using the vario Using the turbo Using the surface p.11 p.12 p.13 lance lance cleaner Replacing the Using detergent Cleaning the Storing the product p.16 p.14 p.17 p.18 o-ring solution product...
  • Page 11 USING THE VARIO LANCE NOTE: Turn the front end of the nozzle clockwise for a focused stream. Turn counterclockwise for a wider spray pattern. NOTE: Turn the rear end of the nozzle counterclockwise or clockwise to increase or decrease water pressure. Use low water pressure for soaping applications.
  • Page 12: Using The Turbo Lance

    USING THE TURBO LANCE WARNING: Do not point the lance towards people, animals, live electrical equipment, or the product. The high pressure water immediately flows out after the product is turned on. 1. Turn the on/off switch to the off position. Set the trigger handle lock to the lock position.
  • Page 13 USING THE SURFACE CLEANER 1. Turn the on/off switch to the off position Set the trigger handle lock to the lock position. 2. Insert the lance extension into the spray angle. Turn the extension until it clicks into place. Insert the surface cleaner into the extension.
  • Page 14 USING DETERGENT SOLUTION WARNING: Do not point the lance towards people, animals, live electrical equipment, or the product. 1. Turn the on/off switch to the off position. Remove the cap from the detergent tank. 2. Fill the tank with detergent solution. 3.
  • Page 15 6. Turn the on/off switch to the on position. Set the trigger lock to the unlock position. Squeeze the trigger to operate the product. NOTE: Turn the front end of the nozzle clockwise or counterclockwise to get a focused or spray water pattern. Operation...
  • Page 16: Replacing The O-Ring

    REPLACING THE O-RING 1. Remove any damaged or cracked o-ring from the nozzle wand end or hose end. NOTE: Check the nozzle wand end or hose end for stretched, cracked, or split o-ring. 2. Dispose of the damaged o-ring properly. Contact your local distributor for the suitable replacement o-ring.
  • Page 17: Cleaning The Product

    CLEANING THE PRODUCT 1. Turn the on/off switch to the off position. Disconnect the product from the power outlet. 2. Clean the product using a brush. WARNING: Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents.
  • Page 18: Storing The Product

    STORING THE PRODUCT 1. Turn the on/off switch to the off position. 2. Disconnect the product from the power outlet. 3. Turn off the water supply. 4. Set the trigger handle lock to the unlock position. Squeeze the trigger until no more water flows out of the product.
  • Page 19 6. Disconnect the garden hose from the water inlet port and garden tap. NOTE: If the product is pulsating intermittently or water is not exiting the nozzle smoothly, the nozzle may be blocked. Use the nozzle cleaning tool to remove blockages and clean the nozzle.
  • Page 20: Product Specifications

    Electric high pressure cleaner measured in accordance with a standardised Model RACPWS22 RACPWS23 test and may be used to compare one tool with Rated voltage 220 - 240 V a.c.
  • Page 24 Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. 099903084001-01...

This manual is also suitable for:

Racpws23

Table of Contents