Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ryobi RACPWS2
Summary of Contents for Ryobi RACPWS2
- Page 1 FRONT PAGE RACPWS2...
-
Page 2: Intended Use
■ To reduce the risk of injury, keep children IMPORTANT! and visitors away. All visitors should wear It is essential that you read the instructions safety glasses and be kept at a safe in this manual before assembling, operating, distance from the work area. and maintaining the product. -
Page 3: Electrical Safety Warnings
utility company when connecting the product ■ Do not allow children or untrained individuals to a water supply line. to use the product. ■ Before starting any cleaning operation, ELECTRICAL SAFETY WARNINGS close doors and windows. Clear the area to ■... -
Page 4: Overload Protection
TRANSPORTATION AND STORAGE ■ Regularly inspect and maintain the product CAUTION! Mind the weight of the product for safe operation. RYOBI recommends when selecting the storage location and during inspecting the product every 6 months. transportation to prevent accidents or injuries. -
Page 5: Symbols On The Product
off the pump and the high-pressure jet stops. If the lever is pulled, the pump Power turns on again. ■ Overload protection Turn the bottom portion of the – A thermal sensor protects the product from overloading. The product will nozzle all the way to the right to activate low pressure mode automatically shut the power down while... - Page 7 RACPWS2 Carry handle Hose hanger Rotary brush Handle screws Lance hook Detergent bottle Operator’s manual O-rings Power cord holder Nozzle cleaning tool On/off switch Power cord Water inlet filter Water inlet port Detergent tank cap Detergent tank Wheel Hose release button...
- Page 8 Wear full eye and ear protection, Push down the trigger handle holder Attach the carry handle onto the protective gloves, substantial footwear, until the buttons click, securing the product. and long trousers at all times while handle in place. Push down the power operating the product.
- Page 9 Secure the carry handle in place using Attach the hose hanger onto the carry Secure the hose hanger using handle screws. Turn the handle screws clockwise to tighten. handle screws. Turn the handle screws handle. clockwise to tighten. Insert the high pressure hose into the On one end of the garden hose insert a hose coupler.
- Page 10 Using the vario Using the turbo Using the detergent Using detergent p.11 p.15 p.12 p.13 lance bottle lance or rotary brush solution Replacing the Cleaning the Storing the product p.17 p.18 p.19 o-ring product...
- Page 11 USING THE VARIO LANCE NOTE: Turn the front end of the nozzle clockwise for a focused stream. Turn counterclockwise for a wider spray pattern. NOTE: Turn the rear end of the nozzle counterclockwise or clockwise to increase or decrease water pressure. Use low water pressure for soaping applications.
- Page 12 USING TURBO LANCE ROTARY BRUSH WARNING: Do not point the lance towards people, animals, live electrical equipment, or the product. The high pressure water immediately flows out after the product is turned on. 1. Turn the on/off switch to the off position. Set the trigger handle lock to the lock position.
- Page 13 USING THE DETERGENT BOTTLE 1. Turn the detergent bottle in a clockwise direction, and pull out the detergent nozzle head. 2. Fill the bottle with detergent solution. Reinstall the detergent nozzle head to the bottle. 3. Insert the detergent bottle head into the spray angle.
- Page 14 5. Turn the knob of the detergent bottle clockwise to increase or decrease the amount of the detergent. NOTE: Turn the front end of the nozzle clockwise or counterclockwise to get a focused or spray pattern. Operation...
- Page 15 USING DETERGENT SOLUTION WARNING: Do not point the lance towards people, animals, live electrical equipment, or the product. 1. Turn the on/off switch to the off position. Remove the cap from the detergent tank. 2. Fill the tank with detergent solution. 3.
- Page 16 6. Turn the on/off switch to the on position. Set the trigger lock to the unlock position. Squeeze the trigger to operate the product. NOTE: Turn the front end of the nozzle clockwise or counterclockwise to get a focused or spray water pattern. Operation...
-
Page 17: Replacing The O-Ring
REPLACING THE O-RING 1. Remove any damaged or cracked o-ring from the nozzle wand end or hose end. NOTE: Check the nozzle wand end or hose end for stretched, cracked, or split o-ring. 2. Dispose of the damaged o-ring properly. Contact your local distributor for the suitable replacement o-ring. -
Page 18: Cleaning The Product
CLEANING THE PRODUCT 1. Turn the on/off switch to the off position. Disconnect the product from the power outlet. 2. Clean the product using a brush. WARNING: Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents. -
Page 19: Storing The Product
STORING THE PRODUCT 1. Turn the on/off switch to the off position. 2. Disconnect the product from the power outlet. 3. Turn off the water supply. 4. Set the trigger handle lock to the unlock position. Squeeze the trigger until no more water flows out of the product. - Page 20 6. Disconnect the high pressure hose from the water outlet port. 7. Disconnect the garden hose from the water inlet port and garden tap. NOTE: If the product is pulsating intermittently or water is not exiting the nozzle smoothly, the nozzle may be blocked. Use the nozzle cleaning tool to remove blockages and clean the nozzle.
-
Page 21: Product Specifications
Electric high pressure cleaner measured in accordance with a standardised Model RACPWS2 test and may be used to compare one tool with Rated voltage 220 - 240 V a.c. another. They may be used for a preliminary assessment of exposure. - Page 24 Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. 099903082001-01...