User Name: You must input the default administration user name: admin as login user
name.
Password: The default password is empty. After setup password is completed from the MFP
server, you have to remember this password to input password box.
TCP/IP Setup
1. Click Setup, it then appears the sub-menu.
Click TCP/IP, it then as shown in the following picture.
2.
DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a
DHCP/BOOTP server on your network. This option allows the MFP server
to obtain IP-related settings automatically from your DHCP server.
IP Address: This option allows you to input IP address from the MFP server. The IP address
must meet the IP addressing requirements of the network segment.
Subnet Mask: This option allows you to input subnet mask from the MFP server. The IP
address must meet the IP addressing requirements of the network segment.
Default Router: This option allows you to input gateway from the MFP server. This IP
address of gateway must meet the router or gateway to go across of the network
segment.
21