Setup Menu - TP-Link TL-PS210U Network Setup Manual

Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a
IP Address: This option allows you to view IP address from the MFP server. The IP address
must meet the IP addressing requirements of the network segment.
Subnet Mask: This option allows you to view subnet mask from the MFP server. The IP
address must meet the IP addressing requirements of the network segment.
Gateway: This option allows you to view gateway from the MFP server. This IP address of
gateway must meet the router or gateway to go across of the network segment.

Setup Menu

Enter the IP address of the MFP server as the URL, for example, 192.168.0.10. Then the
MFP server's home page will appear in content of the web browser.
Please follow this information in the setup menu of the MFP server:
System Setup
1.Click Setup, it then appears the sub-menu.
2.Click System, it then as shown in the following picture.
DHCP/BOOTP server on your network, this option allows the MFP server
to obtain IP-related settings automatically from your DHCP server.
19