Setup Utility for Windows 2000/XP/Vista
3
. The
The setup utility is a proprietary Windows-based management program that can assist you in
configuring and managing your MFP server in Windows 2000/XP/Vista environments. The
program can be installed from the setup CD of MFP server.
Installing the setup utility and driver:
Hardware Installation:
1. Connect one end of the UTP cable to the Ethernet port on MFP Server and the other end
to a wall jack or HUB.
2. Connect the power adapter.
3. Connect the USB cable to the USB port on the side of MFP Server and the other end to
your MFP device.
Note:
You can install the MFP printer's driver and utility into your computer in advance.
Or, you can install the MFP server's driver and utility first, and then install the MFP printer's
driver and utility by the notice of Windows pop-up message (recommended).
Software Installation:
Insert the MFP server setup CD. If the start-up screen does not appear, double-click My
1.
Computer, double-click the CD-ROM icon, and then double-click autorun.exe.
Choose Installation to install all software programs.
2.
6