Setup Menu - TP-Link TL-WPS510U User Manual

Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a
DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related
settings automatically from your DHCP server.
IP Address: This option allows you to view IP address from the print server. The IP address
must meet the IP addressing requirements of the network segment. (default: 192.168.0.10)
Subnet Mask: This option allows you to view subnet mask from the print server.
Gateway: This option allows you to view gateway from the print server.

5.4 Setup Menu

Meanwhile, you have finished the IP address configuration with print server. You should use web browser
to configure the print server. The setup menu of the print server helps administrator to setup the print
server.
Preparation
Enter the IP address of the print server as the URL, default: 192.168.0.10. Then the print server's home
page will appear in content of the web browser.
Please follow this information in the setup menu of the print server:
27