Table of Contents
Advertisement
1.
Use a CAT5 UTP cable to connect a PoE port of the PSE( ex.
PoE Switch) to the POWER+DATA IN port.
2.
Choose the appropriate DC output by the Power-mode Switch,
default output is 12V.
Note:
Please make sure that the output is correct, different voltage may
destroy the device.
3.
Connect the LAN OUT port to the Ethernet device with CAT5
UTP cable for data transmitting.
4.
Connect the DC OUT port to the power port of the same
Ethernet device with the provided power cable.
Note:
The power of Ethernet device is suggested to be under 10W.
Now, the Ethernet device can work normally with data and power.
The topology of this network is as follows:
PoE Switch
TL-SF1008P
PC
CAT5 UTP Cable
(Power & Data)
PoE Receiver Adapter
TL-POE10R
Power Cable
CAT5 UTP Cable
(Data)
4
Notebook
With Wireless Adapter
Wireless AP
TL-WA601G
Advertisement
Table of Contents
