Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for TP-Link TL-POE200
Summary of Contents for TP-Link TL-POE200
- Page 1 User Guide TL-POE200 Power over Ethernet Adapter Kit Rev:1.0.0 7106500904...
- Page 2 No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2009 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www.tp-link.com...
-
Page 3: Fcc Statement
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 4: Ce Mark Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. -
Page 5: Table Of Contents
CONTENTS Package Contents ................1 Chapter 1 Introduction ..............1 Overview of the Production ..........1 Features................2 Chapter 2 Identifying External Components ......2 PoE Injector ..............2 PoE Splitter ...............3 Chapter 3 Connecting the Power over Ethernet Adapter Kit ..4 Appendix: Specifications ..............7... -
Page 6: Package Contents
Chapter 1 Introduction 1.1 Overview of the Production Thank you for choosing the TL-POE200 Power over Ethernet Adapter Kit comprised of the Injector and Splitter. The Injector sends power and data over the Ethernet cable to the Splitter. Then the Splitter separates the data and power back into two cables and delivers them to the remotely located access point or other network device that requires a 5/9/12-volt power input. -
Page 7: Features
1.2 Features Complies with IEEE 802.3, IEEE 802.3u standards Transmits electrical power along with data in one single cable Supports optional 5V DC , 9V DC or 12V DC power supply Supports Plug-and-Play for the devices without any configuration Elegant appearance with space-saving miniature size Chapter 2 Identifying External Components 2.1 PoE Injector POWER+DATA OUT: Connect to the PD or PoE Receiver... -
Page 8: Poe Splitter
LAN IN: Connect to a DC 48V: Connect to the network device (such as provided power adapter a Switch or Router) with which can supply steady CAT5 UTP cable. power of 48V DC. PWR: Power LED, a steady green light indicates that the power adapter is working properly. -
Page 9: Chapter 3 Connecting The Power Over Ethernet Adapter Kit
PWR: Power LED, a steady green light indicates that the PoE Injector can supply power. Note: TL-POE200 Power over Ethernet Kit is not compliant with IEEE 802.3af standard. The TL-POE200A (PoE Injector) and TL-POE200B (PoE Splitter) can only be operated together. - Page 10 Step 1: Insert one end of a Cat 5 Ethernet RJ45 Cable into the LAN IN port of the PoE Injector, and connect the other end of the cable to you network Switch or PC. Note: Do not mistake the LAN IN port with the POWER+DATA OUT port.
-
Page 12: Appendix: Specifications
Appendix: Specifications Normal IEEE 802.3, IEEE 802.3u, CSMA/CD, Standards TCP/IP Voltage Output DC 5V, 9V or 12V Output Power 12V/1A, 9V/1.2A, 5V/2.3A 1 10/100M Auto-Negotiation RJ45 LAN port TL-POE 1 10/100M Auto-Negotiation RJ45 PoE port 200A 1 48VDC Power Input Port Ports 1 10/100M Auto-Negotiation RJ45 LAN port TL-POE...