Download Print this page
TP-Link TL-POE2412G Installation Manual

TP-Link TL-POE2412G Installation Manual

Passive poe adapter

Advertisement

Quick Links

Installation Guide
Passive PoE Adapter
TL-POE2412G/TL-POE4824G
Package Contents: passive PoE adapter, power cord, wall mount kits
Note: TL-POE2412G is used as an example throughout this guide. Other models may differ in appearance.
Connection
Use the passive PoE adapter to simultaneously supply power and transmit data to a passive PoE device.
Passive PoE Devices
IP Camera
Note: Before connecting a passive PoE device, please check the required voltage in its product manual.
Installation
Note: To ensure the passive PoE adapter is attached most securely, it is recommended to install the adapter with the Ethernet port facing upward.
1. Drill two holes on the wall and insert the plastic wall anchors into the
the holes. Secure the mounting bracket to the wall. Make sure the
shoulders at the corners of the mounting bracket are on the outside
and pointing upward.
Passive PoE Adapter
AP
CPE
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code
2. Attach the passive PoE adapter to the mounting bracket by sliding the
adapter in the direction of the arrows until it locks into place.
7106508124 REV1.0.2
AC Power Cord
Ethernet Device
(switch, router, etc.)

Advertisement

loading
Need help?

Need help?

Do you have a question about the TL-POE2412G and is the answer not in the manual?

Questions and answers

Сергей
March 26, 2025

есть ли сброс у Инжектоа PoE TP-Link TL-POE2412G

1 comments:
Mr. Anderson
March 26, 2025

No, the TP-Link TL-POE2412G PoE Injector does not have a reset option. It does not support remote reset capability and does not have a reset button.

This answer is automatically generated

Сергей
March 26, 2025

Как пропинговать Инжектор PoE TP-Link TL-POE2412G

1 comments:
Mr. Anderson
May 14, 2025

You cannot ping the TP-Link TL-POE2412G PoE injector because it is a passive device without a network interface or IP address. It only provides power and data passthrough; it does not have network functionality to respond to pings.

This answer is automatically generated

Сергей
March 21, 2025

Есть ли у данного устройства IP адрес

1 comments:
Mr. Anderson
March 21, 2025

No, the TP-Link TL-POE2412G PoE Injector does not have an IP address. It is a passive PoE injector that provides power over Ethernet but does not perform network routing or switching functions that require an IP address.

This answer is automatically generated

pete v
July 29, 2025

how to reset password

Summary of Contents for TP-Link TL-POE2412G

  • Page 1 7106508124 REV1.0.2 Package Contents: passive PoE adapter, power cord, wall mount kits Note: TL-POE2412G is used as an example throughout this guide. Other models may differ in appearance. Connection Use the passive PoE adapter to simultaneously supply power and transmit data to a passive PoE device.
  • Page 2 備考3. " - " 系指該項限用物質為排除項目。 compliance could void the user’s authority to operate the equipment. TP-Link hereby declares that the device is in compliance with the essential requirements Explanation of the symbols on the product label and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.

This manual is also suitable for:

Tl-poe4824g