Table of Contents
Advertisement
Side Frame Bracket Installation (cont.)
Repeat the procedure for the installation of the Left Frame Bracket (Item #1).
To secure the Left Frame Bracket (Item #1) to the mower's rear lower Left side frame use (2) 3/8"-16 x 1-1/4" HHCS
(Item #4) and (2) 3/8"-16 Flange Nuts (Item #5). Refer to Figure C.
To secure the Left Bracket to the Top Frame Bracket / Left (Item #2) use (2) 3/8"-16 x 1" HHCS (Item #3) and (2) 3/8"-
16 Flange Nuts (Item #5). Refer to Figure C.
Keep the hardware relatively loose until after the installation on pg 11.
Figure C
Main Frame Bracket Installation
Before installing the Main Frame Bracket (Item #1) locate and remove the set of hardware on the mower's lower rear
frame and the (2) set securing the mower's hitch receiver. Refer to Figure A.
Note: Some parts and part features have been removed from view for visual clarity.
Figure A
Remove Hardware
from the rear and
(2) set of Hardware
from Hitch Receiver
9
Advertisement
Table of Contents
