Table of Contents
Advertisement
Side Frame Bracket Installation
Before the installation of the Side Frame Brackets, locate and remove the (2) set of hardware used to secure the
lower part of the mower's rear frame, refer to Figure A. It is recommended to work and install on one side first before
moving onto the other side. It is also recommended to remove the right rear roller and roller mount bracket for
clearance of the PTO Installation. See Figure A.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Remove Right Roller and
Roller Mount Bracket
Remove Hardware
for installation of the
Right Frame Bracket
Place and position the Right Frame Bracket (Item #1) to the mower's lower right frame side and align the bolt holes of
the Right Frame Bracket to the Top Frame Bracket / Right (Item #2) and the mower's frame. Refer to the Figures B.
Secure the Right Frame Bracket relatively loose to the mower by using (2) 3/8"-16 x 1-1/2" HHCS (Item #3) and (2)
3/8"-16 Flange Nuts (Item #5). Secure the Right Frame Bracket relatively loose to the Top Frame Bracket / Right by
using (2) 3/8"-16 x 1-1/4" HHCS (Item #4) and (2) 3/8"-16 Flange Nuts (Item #5). Refer to Figure B.
Keep the hardware relatively loose until after the installation on pg 11.
Figure B
Mower's
Rear Frame
8
Advertisement
Table of Contents
