Advertisement
Opening the Package
• Please ensure that all ordered optional
accessories are included in the separate
accessory box.
• Please check the packaging list first. If there are
any missing or broken parts, please contact the
authorized distributor of Relay2, Inc.
Safety
• Read the Quick Installation Guide carefully before
installation and power-up.
• To avoid overheating, make sure the AP allows for
proper heat dissipation, and leave enough room
for air circulation.
• Do not directly touch the bottom of the AP to
avoid scalding. When the AP is in operation,
depending on the environment's temperatures,
the surface temperature of the back cover might
get hot.
• Any unauthorized modification of the product
structure and safety design is not allowed.
3
©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com
Before You Start
• Before installation, a signal detecting test can be
used to determine the best installation position.
• Keep your body at least 20 cm away from the AP
during installation and operation.
• Install the AP at least 1 m distance from any
metal obstructions to avoid the radio signal
being affected by metal shielding.
• To avoid radio interference, keep the device
away from magnets or magnetic fields (e.g., do
not place near a microwave, refrigerator, etc.).
Power Source Options
• The RA320 access point can be powered by using
the external Relay2 AC Adapter, PoE Injector (both
sold separately), or a third-party PoE+ switch.
Warranty
• Please provide the device model, MAC address,
and serial number shown on the tag of the side
panel.
• The warranty does not cover any product that
has been opened without authorization from
Relay2 Inc.
• Reasonable repair and shipping costs will be
charged for product faults or damage caused
by using non-Relay2 accessories or improper
operation.
Advertisement
