Table of Contents
Advertisement
TROUBLESHOOTING
PROBLEM
Burner won't light
Burner flame is low
Carbon build-up
Thick black smoke
POSSIBLE CAUSE
Propane cylinder is empty
Blockage in orifice
Control knob is not in ON position
Gas pressure is low
Outdoor temperature is less than
4.4 ºC/40 ºF and tank is less than 1/4 full
Control knob fully ON
Dirt or film on reflector and burner screen
Blockage in burner
Figure 236, Page 13
CORRECTIVE ACTION
Replace propane cylinder
Clear blockage
Turn control knob to ON
Turn cylinder valve OFF and fill the
cylinder
Use a full cylinder
Check burner and orifices for
blockage
Clean reflector and burner screen
Remove blockage and clean burner
inside and outside
Advertisement
Table of Contents
