Duplicate Name Menu; Receiving From A Ti-84 Plus Silver Edition Or Ti-84 Plus - Texas Instruments TI-84 Plus Manual Book

DuplicateName Menu DuplicateName Menu DuplicateName Menu DuplicateName Menu
During transmission, if a variable name is duplicated, the
displayed on the receiving unit.
DuplicateName
1: Rename
2: Overwrite
3: Omit
4: Quit
When you select
1:Rename
new variable name, and then press Í. Transmission resumes.
When you select
2:Overwrite
on the receiving unit. Transmission resumes.
When you select
3:Omit
variable name. Transmission resumes with the next item.
When you select
4:Quit

Receiving from a TI-84 Plus Silver Edition or TI-84 Plus

Receiving from a TI-84 Plus Silver Edition or TI-84 Plus
Receiving from a TI-84 Plus Silver Edition or TI-84 Plus Receiving from a TI-84 Plus Silver Edition or TI-84 Plus
The TI-84 Plus Silver Edition and the TI-84 Plus are totally compatible. Keep in mind,
however that the TI-84 Plus has less Flash memory than a TI-84 Plus Silver Edition.
Chapter 19: Communication Link
Prompts to rename receiving variable.
Overwrites data in receiving variable.
Skips transmission of sending variable.
Stops transmission at duplicate variable.
, the
Name=
, the sending unit's data overwrites the existing data stored
, the sending unit does not send the data in the duplicated
, transmission stops, and the receiving unit exits receive mode.
prompt is displayed, and alpha-lock is on. Enter a
menu is
DuplicateName
560